Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
8th March 2020, 12:17 PM #1New Member
- Join Date
- Mar 2020
- Location
- Western Australia
- Age
- 80
- Posts
- 9
Problem with Triton finger Jointer
Hi to all
I need some help with a Triton FJA 300 Finger Jointer that I have put together as per the
assembly and operating instruction.
Everything went together well until it came to setting the 1/2 inch finger to the cutter.
The Cutter Surrounds obstructs the 1/2 finger which has to be set at 1/2 inch from the cutter before
starting work on making the joint.
I have watched all the videos I can find online but they don't cover the assembly of the jointer.
Any help would be gratefully received.
Regards
Little John
-
8th March 2020 12:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
8th March 2020, 09:27 PM #2
I can't help with the setup procedure but thought you might want to also post your question here.
-
9th March 2020, 12:11 AM #3New Member
- Join Date
- Mar 2020
- Location
- Western Australia
- Age
- 80
- Posts
- 9
Thanks Treecycle have copied my request and posted it to Triton-GMC page.
Similar Threads
-
Finger Jointer Problem
By Chippie in forum TRITON / GMCReplies: 6Last Post: 7th January 2004, 08:15 AM -
Triton Finger Jointer
By Ausplane in forum TRITON / GMCReplies: 3Last Post: 16th May 2003, 09:45 AM -
triton finger jointer
By jow104 in forum ROUTING FORUMReplies: 7Last Post: 6th May 2003, 09:44 PM -
Triton finger jointer
By johna in forum TRITON / GMCReplies: 3Last Post: 22nd January 2002, 05:47 PM