Thread: Advice on upgrading my Ryobi 2000W SLIDE COMPOUND MITRE SAW (254MM) - EMS254RG

If you are frustrated with a mitre saw you will likely be frustrated with a sliding compound mitre saw - there is always some play in the sliding mechanism. Laser lines don't help with accuracy (with saws).

About the table saw - this thread has some useful info and discussions on options:
What would cause this ?

I've used both the DeWalt 7485 and 7491 The both have a good fence. Hardly any play when locked. Does the Metabo have a similar fence?

Have you considered a guillotine? This is the preferred tool of picture frame makers. Alternatively consider making a simple mitre shooting board; much cheaper than buying a new chop saw that is really only accurate enough for house framing anyway.

Is the issue movement in the saw or the blade walking? You might be happy with the results from a good quality blade on your current saw. A guillotine will give the best results

Well, depending on your budget and the features you need, the Festool Kapex could be what you want. The price is high but there are some "niceties" that make the saw a pleasure to use. The handle and trigger switch are a little strange but you get used to them. Accuracy, while not "picture frame perfect" is pretty darn good and the bevel adjustment is what all the other saws should copy. Mitre angles are accurate and repeatable. Yes, I quite like mine.