Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
20th January 2013, 10:33 PM #1Novice
- Join Date
- Jan 2013
- Location
- Melbourne
- Posts
- 21
Changing the arbor on a slide mitre saw
Hi all,
just wondering if anyone knows if its possible to change the arbor size on a mitre saw. I recently brought a MIlwaukee MS216SB (need a saw with internal rails) but it has a 30mm arbor. Just wondering if its possibkle to put a 5/8 or 1" arbor on it. The guide bushing/blade stabilizer is removable, but im not sure where you'd find smaller ones.
-
20th January 2013 10:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th January 2013, 10:45 PM #2
If you know someone or can find someone on this forum close to you, changing the strp size on the flange is doen in a few minutes.
If you want to have the option of both or even all three sizes, just get a couple of spares for the Milwaukee.Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
Similar Threads
-
Changing arbor size
By haggismuncher in forum TABLE SAWS & COMBINATIONSReplies: 4Last Post: 28th February 2011, 08:04 PM -
Slide Compound Mitre Saw from the USA
By crowie in forum WOODWORK - GENERALReplies: 4Last Post: 6th February 2011, 09:45 PM -
GMC Slide Compound Mitre Saw
By duke900 in forum HAND TOOLS - POWEREDReplies: 7Last Post: 22nd May 2006, 05:53 PM -
Compound Mitre Saw - To Slide or not to Slide?
By Tilly in forum HAND TOOLS - POWEREDReplies: 11Last Post: 3rd June 2005, 05:14 PM -
Changing Triton mitre guide
By AshleyM in forum HAND TOOLS - POWEREDReplies: 10Last Post: 18th November 2002, 04:00 PM