Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Drill Press Mag Switch
-
29th July 2011, 04:24 AM #1Member
- Join Date
- Aug 2007
- Location
- SA
- Posts
- 55
Drill Press Mag Switch
I need to replace the Mag switch on my drill press. size is around 9cm x 6 cm.
Any idea where I could get one?
-
29th July 2011 04:24 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th July 2011, 08:45 AM #2
Hi
This eBay My World - chaudiolab eBay seller has a wide variety of similar switches in stock.
Apart from that, I'd try H&F, some of their machines (including their drill presses) have similar switches.The first step towards knowledge is to know that we are ignorant.
-
22nd August 2011, 09:03 PM #3Member
- Join Date
- Aug 2007
- Location
- SA
- Posts
- 55
No luck so far.
Model is CH 16N which has been sold by a few places but I haven't been able to get a switch yet. Thinking this must be a reasonably universal size and I should be able to find a different switch that fits. I got lucky when I bought the thing and it's a really good drill press other than the switch which was always a bit dodgy.
-
11th October 2011, 04:46 PM #4Awaiting Email Confirmation
- Join Date
- Oct 2005
- Location
- Merimbula NSW
- Posts
- 282
I bought one through CarbaTech it took a while as I recall and didn't help (see post above) (
-
15th October 2011, 07:40 PM #5
I have a band saw and bench grinder Both of which had these switches, they both failed at different times , I went to JAYCAR , and got illuminated switches and made plates to fit the tools , and fitted new switches .
Cost about $5.00 each.
Jeff
Similar Threads
-
Drill Press vs Normal Drill on stand
By johno_84 in forum HAND TOOLS - POWEREDReplies: 7Last Post: 1st October 2021, 01:55 PM -
new drill press: quill stroke vs drill bit length ?
By bannock in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 21st June 2008, 09:09 AM -
Sher Drill Press Switch failure
By Eowyn in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 2nd July 2005, 06:26 PM -
Sher Drill Press Switch failure
By Eowyn in forum GENERAL & SMALL MACHINERYReplies: 0Last Post: 2nd July 2005, 12:50 PM