Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
28th December 2013, 12:21 PM #1New Member
- Join Date
- Jan 2013
- Location
- Ashhurst, New Zealand
- Posts
- 2
Drum Sander- belt or roller feed? any preferences
I'm looking to build a drum sander (as an add on to my spindle sander), seen 10,000 you tube videos and some very fine projects, I would prefer to use powered feed rollers rather than a flat conveyor belt but need some advice from those who have experience.
Any help on the pros and cons of both systems would be appreciated
-
28th December 2013 12:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th December 2013, 10:58 PM #2Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
None of the major industrial wood machine manufacturers make a roller fed sander, that's gotta be saying something.
My thoughts are that the abrasive on drum/wide belt sanders produces a lot more force against the feed direction than knives on a thicknesser, so having the entire surface of the piece in contact with a rubber feed belt will give it better feedability (I know it's not a word, but can't think of a better way to get the point across) than 2 or 3 contact patches from rollers. A belt and idle pressure rollers also means that there's no dragging of the underside of the piece on the table which would very likely damage the finish if you're sanding both sides.
-
29th December 2013, 09:56 AM #3
Belt and flat plate (underneath) is the only way to go IMHO.
I think you'd have trouble getting the timber perfectly flat using any kind of roller system.
Don't know how I ever managed without my JET 16/32. I only intended to use it with 120 grit paper for final dimensioning/removing machine marks, but its so easy to change the papers that I now go to 180 or even 240 grits as required. For anyone else with one of these machines, the papers supplied by The Sandpaperman (forum sponsor) for drum sanders are excellent quality and long lasting - much better than the JET stuff.
-
1st January 2014, 01:30 AM #4Senior Member
- Join Date
- Mar 2013
- Location
- Tasmania
- Posts
- 394
Hi SuperTuck. On the 24th April under the heading of - Some of my stuff - i showed pics of what i called a drum sander & probably more correctly should be called a tube sander as it uses a pneumatic tube inflated to sized rolls. In recent weeks i have used this when restoring wooden toy car service stations.I started off using a combo belt/disc unit after seperating the pieces when suddenly the 'light bulb' hit & i thought - of course, why not use the old tube sander - worked a treat esspecially getting into & around the curves of these old items because you get the flexibility from different pressures you apply to the tube.For the flat/edge areas i used the combo.Just my couple of cents worth.
-
1st January 2014, 01:41 AM #5Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
-
1st January 2014, 10:45 AM #6
Indeed it is - I've used one mounted on a lathe. Very good for freehand sanding larger curves.
Similar Threads
-
Tracking Drum Sander Conveyer Belt
By Wolfs in forum GENERAL & SMALL MACHINERYReplies: 2Last Post: 1st February 2012, 07:12 AM -
Drive Belt Tracking on Performax 16-32 Drum Sander
By jaksam in forum GENERAL & SMALL MACHINERYReplies: 1Last Post: 8th January 2012, 08:11 PM -
wide belt or drum sander wanted
By bobsreturn2003 in forum HAND TOOLS - POWEREDReplies: 0Last Post: 4th September 2008, 07:50 PM -
Powered Feed Drum Sander
By junkboy999 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 11Last Post: 7th August 2005, 08:08 PM