Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Ezycut
-
19th September 2011, 09:36 PM #1New Member
- Join Date
- Sep 2011
- Location
- Western Australia
- Age
- 76
- Posts
- 6
Ezycut
I recently inherited an Ezycut fret saw !? , sadly it's missing whatever goes through the bronze bushes in the overarm , also there is a post/rod in the overarm with a flat machined on it and a 3/16 hole drilled through, I'm guessing a guide or foot hangs off it!
sooo if anyone can help with a description of the missing bits or a user manual / copy or if there is a God the parts I would be very grateful,
Thanks Lads
Jim West Oz
-
19th September 2011 09:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th April 2012, 09:16 PM #2New Member
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 5
I have an Ezycut scroll saw that I scored today, and can send you some photos of the head assembly if you like.
The rod with the flat on it has a presser foot on it as well as a blade support roller and also an air blower nozzle.
The bronze bearing normally houses the upper blade support which is essentially a cylinder that has a spring on it which pushes the cylinder up and thus tensioning the blade. On its lower extremity it has a blade clamping mechanism very similar to the lover blade clamp. The spring tensionining mechanism incorporates a piston that is a very simple air pump that supplies air via a flexible hose to the presser foot and blows the saw dust away from the line marked on your work that you are following. The machine will operate without the upper spring loaded blade clamp IF you have the support roller.
It is a nice solid old school machine, and cuts very nicely.
Similar Threads
-
Old Ezycut Combination
By orraloon in forum TABLE SAWS & COMBINATIONSReplies: 18Last Post: 5th July 2020, 10:03 PM -
Old Ezycut about to be re-birthed
By Grandad-5 in forum BANDSAWSReplies: 19Last Post: 23rd December 2012, 10:32 AM -
Thoughts on this old Ezycut BS
By RedShirtGuy in forum BANDSAWSReplies: 5Last Post: 24th May 2010, 10:41 PM -
Ezycut Scroll saw
By onetwoone in forum SCROLLERS FORUMReplies: 0Last Post: 5th November 2009, 03:52 AM