Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Drum Sander Lathe attachment
-
4th July 2012, 01:45 PM #1
Drum Sander Lathe attachment
Who wants to make me one?
Why can't I get something that goes across lathe bed that I can clamp onto lathe or toggle clamp to bench. Threaded rods going up to second platter so I can turn up and down for thickness.
Rollers at end for a belt, nead to drive it somehow?
Then a 4 or 6 inch drum I can put on lathe to use as a drum sander.
Will need to pull lathe away from the wall to pass the wood thru but it should be possible shouldn't it.
I don't want the full 36 inch, 15 or 20 inch is plenty for me.
OK, Where's the design engineers, we need plans/Idea's.
Oops, should I have patented it first??
Maybe we can sell it to triton or carby's.
Peter
-
4th July 2012 01:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th July 2012, 04:46 PM #2Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 1,007
You mean something like this
[ame="http://www.youtube.com/watch?v=mRrHhqe0g00"]$20 THICKNESS SANDER - YouTube[/ame]
or this
Woodturning Online :: Lathe Mounted Drum Sander
a google search shows quite a few threads on other forums etc.____________________________________________________________
there are only 10 types of people in the world. Those that understand binary arithmetic and those that don't.
-
4th July 2012, 04:58 PM #3
Pefect (amost).
How is the feed working on the vid?
The rest of its design I'm happy with.
Off to read the other one now.
-
5th July 2012, 09:50 AM #4
G'day Peter,
Check out the extra videos on the subject on You Tube...acouple of How I Did It ones.
Cheers, crowie
-
5th July 2012, 10:06 AM #5
Thanks.
Similar Threads
-
Carba-Tec 635mm Wide Drum Sander - Single Drum
By macka75 in forum HAND TOOLS - POWEREDReplies: 6Last Post: 28th October 2021, 10:00 PM -
Drum Sander from old Lathe
By Calm in forum GENERAL & SMALL MACHINERYReplies: 3Last Post: 1st April 2008, 05:49 PM -
Balancing and truing Drum for Drum Sander
By Stetwood in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 11Last Post: 27th May 2007, 11:12 PM -
Sanding drum attachment for bench grinder?
By TK1 in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 13Last Post: 6th May 2006, 11:05 PM