Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
16th February 2019, 04:11 PM #1SENIOR MEMBER
- Join Date
- Oct 2017
- Location
- Sydney
- Posts
- 148
JET JPS-10TS - Thermal Overload Reset Switch Location?
Hi Guys,
I was cutting some Ironbark and whilst I thought I was taking it easy, the tablesaw cut out.
I assume there is a thermal overload switch that needs to be reset somewhere (well I hope!)
I checked all over the machine and cant seem to locate it.
I have checked the power socket and it works, didn't trip the mains.
I opened the switch assembly and nothing in there either.
I have looked at the manuals and there is no reset button where it says it should be.
Attached are some photos and was hoping someone might be able to assist.
I am not sure whether the switch has burn't out or what but its been about 45 mins and still can't get it to start.
Any ideas?
IMG_2749.jpgIMG_2748.jpgIMG_2747.jpg
-
16th February 2019 04:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th February 2019, 06:08 PM #2.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,830
Usually they are on the motor itself or on the outside mains connection box on the motor. They are usually a low profile black button so they don't look like a switch.
-
16th February 2019, 08:47 PM #3SENIOR MEMBER
- Join Date
- Oct 2017
- Location
- Sydney
- Posts
- 148
Is there any chance there isn’t one? I have looked everywhere but will have another look tomorrow. ... it’s driving me mad
Sent from my iPhone using Tapatalk
-
16th February 2019, 09:46 PM #4GOLD MEMBER
- Join Date
- Mar 2018
- Location
- Sydney
- Posts
- 1,166
pretty much always on the motor - that's where the temperature sensing happens.
-
16th February 2019, 10:39 PM #5SENIOR MEMBER
- Join Date
- Oct 2017
- Location
- Sydney
- Posts
- 148
Ok I just found it. It's at the front of the motor if you look in after removing the insert plate. Of course I was looking all over the back and sides of the motor!
Thanks guys.
Sent from my iPhone using Tapatalk
Similar Threads
-
Laguna fusion thermal overload switch tripping.
By barri in forum TABLE SAWS & COMBINATIONSReplies: 13Last Post: 11th August 2016, 08:56 AM -
Thermal overload protection
By TritonJapan in forum FESTOOL FORUMReplies: 1Last Post: 9th July 2013, 05:18 PM