Page 2 of 2 FirstFirst 12
Results 16 to 29 of 29
  1. #16
    Join Date
    Oct 2018
    Location
    Dandenong Ranges
    Posts
    1,865

    Default

    Hi Lappa. I bought the Festool clamps but had to grind down the section that slides into the track. Not to much work to modify but so much easier to continually tighten and loosen. I have also got my tool sharpening guys to re shape the alternating bevel on the Festool blades to a much steeper pitch, all to try and avoid chipping on melamine boards. I read lots of reviews online about this saw (and the other coloured versions available - green for Grizzly, yellow for a Total Tools version and even red for Aldi) and one of the weirdest comments that came time and again was about how hard it was topush the plunge release button up and hold in place. People even posted modifications they had made to the spring in order to make it easier. I don't know if I have particularly strong thumbs but mine has never been difficult.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #17
    Join Date
    Mar 2015
    Location
    Perth
    Posts
    18

    Default

    Quote Originally Posted by riverbuilder View Post
    Buy an aluminium straight edge and two clamps, and use your normal circular saw. It will get the job done, and you’ll save $468.85.

    I would do this in preference to any of the saws listed. Particularly if you need to do the project right now.
    Or make a DIY track, which will have the advantage of reducing edge chipping, the same way a regular saw track would do.
    With this and a new fine-cut blade you'll probably match any of the listed track saws for cut quality.

    I'd then keep scraping the pennies for a Makita or Bosch (GKT 55), which are the most budget oriented of the top flight saws.

  4. #18
    Join Date
    May 2020
    Location
    Melbourne
    Posts
    2

    Default

    Hey folks, on a similar thread but with slightly bigger budget...
    I'm just an amateur home DIYer but with some decent projects behind me using lower end tools (room full of floor to ceiling book shelves in laminate, decks/pergolas, stairs etc.). I'm looking to move on to making furniture - a custom AV cabinet, two coffee tables, two dining tables etc. With limited space, track saw and MFT is the go, so trying to choose a plunge saw. Decision is complicated by the fact that I have two DeWalt XR 54V batteries used in my chainsaw. Would the cordless DeWalt suit my purposes (accuracy/quality/accessories), do you have any other suggestions, including 240V? DeWalt skin and track kit would still cost around $1,100, so there are probably a number of other options for the money. The other thing is I'm 53, so at this time I'm thinking "tools for life", which might help push me up a quality level. Was initially looking at Bosch GKT 55 240V, Makita looks OK. Not really thinking of stretching as far as Festool or Mafell... Thanks, Mike



  5. #19
    Join Date
    Jan 2009
    Location
    Adelaide
    Posts
    193

    Default

    The Festool TS55 with 1400mm track is only $1150 so it's not much more than the Dewalt cordless option. I could certainly see the advantage in a cordless plunge saw but once you attach dust collection it's a bit of a non issue.

    Certainly the Festool or Makita will have the greater number of aftermarket accessories for the tracks. If you're looking for tools for life then the Festool is a no brainer but the Makita is just as likely to keep going as long as you do.

  6. #20
    Join Date
    Oct 2019
    Location
    Brisbane, Australia
    Age
    43
    Posts
    519

    Default

    Can't speak to the Makita but I splurged on a Festool TS 55 with an MFT and have never regretted.

  7. #21
    Join Date
    Apr 2019
    Location
    NSW
    Age
    37
    Posts
    1,126

    Default

    i'd stick to a 240v version for a track saw. the extra grunt just helps if you ever need to cut something thick.

  8. #22
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    There is no way I would be forking out Festool money for a Dewalt saw, get the Festool if you are prepared to spend that sort of money, it is the saw that the others are measured by.

  9. #23
    Join Date
    Jul 2015
    Location
    Hunter Valley
    Age
    56
    Posts
    1,342

    Default

    I would completely concur with other posters here pointing at the Festool considering the very small extra cost over the DeWalt you're already looking at.

    One obvious reason is resale value should you ever decide it's not something you're going to pursue.

    My other suggestion is to buy a 1400mm holey rail instead of the normal one. If you ever plunge down the rabbit hole of the LR-32 system, you will already have the required rail, and there is no disadvantage to having a holey rail for your track saw.

  10. #24
    Join Date
    Aug 2006
    Location
    Ryde, NSW, Australia
    Age
    63
    Posts
    131

    Default

    I agonised for months over the Bosch, Makita and Festool track saw and read and watched every review I could. I ended up with the Festool but any of three are great tools.

    I had to wait a couple of months to save up the extra dollars but I am glad I did as the Festool is a brilliant. It's my only Festool tool - so I am not a fan boy.

    Good luck with it.

  11. #25
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    5,105

    Default

    Quote Originally Posted by Fluddman View Post
    ....
    I had to wait a couple of months to save up the extra dollars but I am glad I did as the Festool is a brilliant. It's my only Festool tool - so I am not a fan boy.
    .....

    Classic signs of early stage Festool addiction.

  12. #26
    Join Date
    Aug 2006
    Location
    Ryde, NSW, Australia
    Age
    63
    Posts
    131

    Default

    Quote Originally Posted by GraemeCook View Post
    Classic signs of early stage Festool addiction.
    mmmm well I do like the look of their compact battery drill. But so far I've been able to resist

  13. #27
    Join Date
    Jul 1999
    Location
    Glen Iris, Vic, Australia
    Posts
    2,196

    Default

    I anyone is still looking, I've seen a number of FT 55s on FBMP and GT.

    ~$599 mark used of course

    hth
    Thanks,
    Barry G. Sumpter
    May Yesterdays Tears Quench the Thirst for Tomorrows Revenge

  14. #28
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    5,105

    Default

    Quote Originally Posted by barrysumpter View Post
    I anyone is still looking, I've seen a number of FT 55s on FBMP and GT.

    ~$599 mark used of course

    hth

    That is a depreciation of only 30% from new price of $865 - remarkable how well Festool hold their value.
    Festool TSC 55 160mm Circular Saw Basic 201395 | Total Tools

  15. #29
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    Quote Originally Posted by GraemeCook View Post
    That is a depreciation of only 30% from new price of $865 - remarkable how well Festool hold their value.
    Festool TSC 55 160mm Circular Saw Basic 201395 | Total Tools
    That is a valid point of consideration when purchasing power tools, the Festool products are easily on sold for good money compared to the other brands

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Replies: 20
    Last Post: 28th June 2015, 05:38 PM
  2. Scheppach Plunge Track saw
    By paul.cleary in forum HAND TOOLS - POWERED
    Replies: 9
    Last Post: 13th April 2013, 05:36 PM
  3. Makita 0900 plunge router - sticks when trying to plunge
    By daft in forum HAND TOOLS - POWERED
    Replies: 4
    Last Post: 3rd January 2013, 11:59 AM
  4. TTD Plunge Track Saw
    By TP1 in forum HAND TOOLS - POWERED
    Replies: 2
    Last Post: 15th January 2010, 04:46 PM
  5. Makita Plunge Cut Circular Track Saw V Regular Circular Saw
    By groeneaj in forum HAND TOOLS - POWERED
    Replies: 20
    Last Post: 15th April 2009, 01:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •