Thread: Raising an old Durden Pacemaker from the dead.

Originally Posted by zseriesrob

Well the wiring has been a test, the diagram was really not much help. Fortunately "China" came to my rescue and very kindly leant me his control panel to copy from. It now runs forward and reverse, no problem.
The threading tool I have been waiting for has turned up, BUT it seems whoever packed it, included the wrong insert, this one will not cut a 60deg. thread. I will have the correct one possibly late next week now. Then I can cut the faceplate thread, and I will be done all except for a little more painting.
Rob.

Hi Rob,
I'm just new to this site and found this thread. I am working on a Pacemaker as well and have one problem - when switching the machine to forward it goes in reverse and vice versa. The machine still works, it's just the switching of the forward/reverse function. The wiring currently in place looks pretty good and I think it might be just a case of switching over one or two wires but I'm not an electrician and don't want to make adjustments untill I am 100% sure it is correct. I'll post photo's of the wiring. Perhaps you (and/or China?) have some ideas. Any help, greatly appreciated

IMG_0124.jpg
IMG_0125.jpg
IMG_0126.jpg
IMG_0127.jpg
IMG_4956.jpg
IMG_4957.jpg
IMG_4958.jpg
IMG_4959.jpg

Jamie