Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
13th April 2015, 08:52 PM #1New Member
- Join Date
- Apr 2015
- Location
- Hobart, Tasmania
- Posts
- 4
Seeking: Lathe Chuck - GMC ML-1000
Hi all,
New to the forum, and excited that it seems really active and friendly.
I have finally (5 years after getting it), gotten around to finding the time to setup my GMC ML-1000 lathe. It is a long story.
OK, I have updated and found it is a 3/4 UNF thread. So a basic backplate or chuck, or recommendations for find one for the purpose.
I am after a 4 jaw chuck and back plates to suit, or advice of where I can start looking. Happy to buy for a reasonable price.
Anyone able to help please?
Cheers )Last edited by cybergod; 14th April 2015 at 06:07 PM. Reason: Update
-
13th April 2015 08:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th April 2015, 06:11 PM #2
Try putting this in the Woodturning forum as well. You might have more luck there. https://www.woodworkforums.com/f8
-
15th April 2015, 09:24 PM #3New Member
- Join Date
- Apr 2015
- Location
- Hobart, Tasmania
- Posts
- 4
Thanks
Treecycle, many thanks for the thought. I wasn't 100% sure of the best location, thinking this would be ideal.
The good news is today, I scored a 6" 4-way chuck for $45 in total, so waiting for it to arrive.
I had to work out the screw/shaft size (was originally told (emphatically is the only way to describe it) that it was metric and /14mm (thread?). I headed to another business I know and through some trial and error, he also said it was metric. I wasn't impressed by the "sloppiness" when screwed on. I suggested we try an Imperial thread and viola, 3/4 and 16 TPI, first thread I tried.
I then found the chuck on Ebay. I am still after a faceplate, so will try Ebay again, if not here.
Many, many thinks to all who read and helped.
Cheers
Similar Threads
-
Leda h-1000 lathe
By Taffy64 in forum WOODTURNING - GENERALReplies: 7Last Post: 7th August 2019, 11:38 PM -
Craft Master CCL 1000 Lathe
By Twisted Tenon in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 2nd August 2013, 10:25 PM -
TL 1000 technatool lathe, outboarding?
By ribot in forum WOODTURNING - GENERALReplies: 3Last Post: 12th October 2005, 07:00 PM