Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Start capasitor problems
-
23rd February 2013, 06:04 PM #1Intermediate Member
- Join Date
- Jul 2012
- Location
- Newcastle
- Posts
- 31
Start capasitor problems
Hi
Does anyone other than me go through start caps on 3 hp imported 240 volt single phase motors. My saw has blown 2,and today my dusty blew 2 150uf caps. The only spare i had was a 300uf. I put it in anyway and it looks like it is holding. Will this damage the motor?
Kev
ADDED BY ADMIN
DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.
WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk
-
23rd February 2013 06:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd February 2013, 06:41 PM #2Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 1,007
Much more important than the uF rating is the peak votage rating. It should be at least 400V.
You won't damage the motor but you might get sparks and flames if the voltage rating is low.____________________________________________________________
there are only 10 types of people in the world. Those that understand binary arithmetic and those that don't.
-
23rd February 2013, 08:10 PM #3Intermediate Member
- Join Date
- Jul 2012
- Location
- Newcastle
- Posts
- 31
Thanks Avery. Caps are 400volt as supplied to me by the retail outlet that sold me my saw with instructions on changing them(relax admin just changing a capistor ) I am more intrested in why they fail. I checked the voltage at the powerpoint (240 to 250 volt) and does not drop when the dusty is started. Checked with my electo who wired the workshop 6 months ago and it's wired to 20 amp specs.
Kev
Similar Threads
-
Where to start!?
By onepowerball in forum WOODWORK - GENERALReplies: 2Last Post: 13th April 2010, 12:33 PM -
Where do I start
By Ticky in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 17th January 2010, 06:47 PM -
2 stroke warm start problems
By Gingermick in forum MOTOR VEHICLESReplies: 25Last Post: 15th July 2008, 11:31 AM -
Router problems - very slow to start
By TomH in forum ROUTING FORUMReplies: 8Last Post: 10th August 2007, 11:02 AM