Page 2 of 2 FirstFirst 12
Results 16 to 22 of 22
  1. #16
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    The http://www.bunnings.com.au/arlec-15a...block_p7050064 is Arlec model no PB97, according to the Arlec website (http://www.arlec.com.au/detail-2/?de=PB97) the PB97 does have 4 x 15A outlets.

    Model PN96 has 4 x 10A outlets.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #17
    Join Date
    Aug 2010
    Location
    Bendigo
    Age
    72
    Posts
    1,986

    Default

    Ok, must have had the wrong one in my hands..
    I still wouldn't run 2 15A machines i.B. the one 15A extension lead...
    Cheers,
    Joe
    9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...

  4. #18
    Join Date
    Jun 2014
    Location
    Seattle, Washington, USA
    Posts
    1,857

    Default

    Quote Originally Posted by jhovel View Post
    Ok, must have had the wrong one in my hands..
    I still wouldn't run 2 15A machines i.B. the one 15A extension lead...
    Yeah, good points all.

    The 2port GPO will have leads which will run to my table saw (3hp) and, likely, a jointer/thicknesser combo machine (3hp).

    I would never run both of those machines at the same time. They're both operations which require focus and concentration. If I were running both at once I would be doing something very, very irresponsible.

  5. #19
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    229

    Default

    [QUOTE]I still wouldn't run 2 15A machines i.B. the one 15A extension lead..[/QUOTE]

    With the circuit breaker built into the power board you will not be able to run 2 15A machines at the same time. When the total current draw through the power board exceeds 15A the circuit breaker will trip, so your single extension lead will be protected.

  6. #20
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    [QUOTE=droog;1890850]
    I still wouldn't run 2 15A machines i.B. the one 15A extension lead..[/QUOTE]

    With the circuit breaker built into the power board you will not be able to run 2 15A machines at the same time. When the total current draw through the power board exceeds 15A the circuit breaker will trip, so your single extension lead will be protected.
    For regular work this would be a right royal PITA, you'd be half way through say ripping a piece of wood and having to go and restart everything.
    You restart and get another foot further into the wood and you would have to do this again - and again and a again
    That's nuts.

    The only reason I can think of to have two machines running is for something like a DC and a dust making machine like a TS but it would be stopping and starting all the time - not worth it IMHO.

  7. #21
    Join Date
    Sep 2005
    Location
    Bendigo
    Age
    60
    Posts
    229

    Default

    For regular work this would be a right royal PITA, you'd be half way through say ripping a piece of wood and having to go and restart everything.
    You restart and get another foot further into the wood and you would have to do this again - and again and a again
    That's nuts.

    The only reason I can think of to have two machines running is for something like a DC and a dust making machine like a TS but it would be stopping and starting all the time - not worth it IMHO.
    My suggestions were not made on the basis that you have two pieces of equipment that you need running at the same time and both require a 15A supply.
    The OP was about switching / splitting power when you have two machines, with the intent to only use one at a time.

    I am really just stating that there is no need to switch the supply so that power is only ever available to one machine at a time. If your intention is to run one 15A machine at a time then the powerboard is a good option, if you do happen to switch on the second machine having forgotten to switch off the first then the breaker in the powerboard will save the extension lead from your brain fade moment.
    I dont know the particular layout but the switchboard may be some distance away from the shed around the other side of the house, if the installed GPO is not capable of supporting 2 15A machines and you forget and turn both on you will have to walk all the way to the switchboard to reset it, with the powerboard it is right there in the shed.

    Totally agree that if you need more than a single 15A supply to run required equipment all at the same time then the powerboard is not what you should be using.

  8. #22
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    Quote Originally Posted by droog View Post
    My suggestions were not made on the basis that you have two pieces of equipment that you need running at the same time and both require a 15A supply.
    The OP was about switching / splitting power when you have two machines, with the intent to only use one at a time.

    I am really just stating that there is no need to switch the supply so that power is only ever available to one machine at a time. If your intention is to run one 15A machine at a time then the powerboard is a good option, if you do happen to switch on the second machine having forgotten to switch off the first then the breaker in the powerboard will save the extension lead from your brain fade moment.
    I dont know the particular layout but the switchboard may be some distance away from the shed around the other side of the house, if the installed GPO is not capable of supporting 2 15A machines and you forget and turn both on you will have to walk all the way to the switchboard to reset it, with the powerboard it is right there in the shed.

    Totally agree that if you need more than a single 15A supply to run required equipment all at the same time then the powerboard is not what you should be using.
    OK - I understand what you mean.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. 15amp Circuit
    By rob_carnell in forum GENERAL & SMALL MACHINERY
    Replies: 5
    Last Post: 25th March 2015, 12:09 AM
  2. 10amp to 15amp
    By Andrew_B in forum THE SHED
    Replies: 3
    Last Post: 28th January 2012, 11:27 PM
  3. 15amp plugs
    By WelderMick in forum WELDING
    Replies: 36
    Last Post: 30th March 2010, 01:29 AM
  4. Install 15amp outlet
    By haosiliu235 in forum WOODWORK - GENERAL
    Replies: 15
    Last Post: 31st October 2007, 09:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •