Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. 6th August 2013, 01:57 PM #1
    Ramps's Avatar
    Ramps
    Ramps is offline JOAT MON
    Join Date
    Nov 2003
    Location
    Donnybrook ... sorta
    Age
    59
    Posts
    621

    Default User manual needed for Carbatec Radial Arm Drill Press RDP-116

    Hi Guys
    I bought one of the radial Arm drill presses from Carbatec a few years back, whacked it together real quick and have used it ad got frustrated with it since.
    Don't get me wrong everything is good and I have used it for numerous tasks that would be beyond the capabilities of a "normal" drill press but...

    the bloomin wobbles are getting the better of me and I can't for the life of me find the manual (and I have 20yrs worth of accumulated manuals!) in order to work out the chuck attachment ... thinking it's a stub taper.

    Carbatec (Perth) apparently don't have an electronic version of the manual and I'm a couple of hours away

    if anyone has the manual for one of these, is there a possibility of a scan/copy ... especially of the relevant page of removing and reseating the chuck, it would be much appreciated

    Cheers

    Ramps
    Ramps

    When one has finished building one's house, one suddenly realizes that in the process one has learned something that one really needed to know in the worst way--before one began.
    Reply With Quote Reply With Quote
  2. 6th August 2013 01:57 PM # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. 12th August 2013, 07:48 PM #2
    Ramps's Avatar
    Ramps
    Ramps is offline JOAT MON
    Join Date
    Nov 2003
    Location
    Donnybrook ... sorta
    Age
    59
    Posts
    621

    Default Stub Taper

    OK then anyone know how to remove a "stub taper"??
    I'm lead to believe from Carbatec that that's what's holding the chuck in
    Cheers
    Ramps
    Ramps

    When one has finished building one's house, one suddenly realizes that in the process one has learned something that one really needed to know in the worst way--before one began.
    Reply With Quote Reply With Quote
  4. 3rd September 2013, 10:49 PM #3
    Ramps's Avatar
    Ramps
    Ramps is offline JOAT MON
    Join Date
    Nov 2003
    Location
    Donnybrook ... sorta
    Age
    59
    Posts
    621

    Default None out there?

    Well I'll be ... I surprised that no one on the forums has this manual ... OK this is a bump
    Ramps

    When one has finished building one's house, one suddenly realizes that in the process one has learned something that one really needed to know in the worst way--before one began.
    Reply With Quote Reply With Quote
  5. 7th September 2013, 08:16 PM #4
    Zsteve
    Zsteve is offline SENIOR MEMBER
    Join Date
    Oct 2001
    Location
    ACT
    Posts
    455

    Default

    not familiar with these drills, but usually what holds a chuck in place is a morse taper. You need some kind of tapered drift - wind down the quill and you should see a slot put the drift taper down in the slot and hit with hammer. chuck sould come out.
    Reply With Quote Reply With Quote
  6. 7th September 2013, 10:40 PM #5
    Ramps's Avatar
    Ramps
    Ramps is offline JOAT MON
    Join Date
    Nov 2003
    Location
    Donnybrook ... sorta
    Age
    59
    Posts
    621

    Default No Slot

    Thanks Steve
    That was my first thought
    No slot in column/shaft
    Guy at Carbatec said it was a stub taper (I didn't feel he was confident)
    Looked up stub tapers and it looks like they exist ... just a short version of the morse taper but no slot so um unsure about shoving some wedges between the chuck and the ??? (can't think of what I might wedge between) and bashing daylight out of it ... I'd like to be sure it's the right approach first
    Thanks for your ideas all the same

    I'll still welcome more ... especially if you have one of these
    Ramps

    When one has finished building one's house, one suddenly realizes that in the process one has learned something that one really needed to know in the worst way--before one began.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. DW 125 Radial Arm Saw User Manual
    By septimusfry in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 39
    Last Post: 30th January 2014, 09:01 PM
  2. Manual Wanted for a Carbatec CH-16NF Drill Press
    By Gomez in forum GENERAL & SMALL MACHINERY
    Replies: 1
    Last Post: 18th February 2013, 05:49 PM
  3. Radial Arm Drill Press
    By seanz in forum GENERAL & SMALL MACHINERY
    Replies: 7
    Last Post: 7th April 2008, 11:23 PM
  4. Makita 6347dwae Drill User Manual Needed!
    By hilux in forum Links to: BOOKS, VIDEOS & PLANS
    Replies: 5
    Last Post: 20th November 2005, 03:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules