Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
Thread: 125mm angle grinder guard
-
25th July 2014, 04:17 PM #1Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 114
125mm angle grinder guard
Hi Everyone
Hoping someone can help. I am looking for an old 125mm guard that I can use on a 5 inch angel grinder that has one missing. It is a Makita unit.
Thanks
Alan
-
25th July 2014 04:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th July 2014, 07:40 PM #2Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
I reckon that would be an easy enough thing to fabricate as a TIG project. They are only half a disc with a lip and some sort of strap to clamp around the spindle boss. Guard thickness on my 4" is 2mm thick, so something between that and say 2.5mm would be fine.
Michael
-
25th July 2014, 07:52 PM #3
Ring around to find an electrical shop that repairs Makita stuff. Some of them will keep the junked burnt out grinders and other tools just for like situations like this . It enables them to get a customer underway with less costs and waiting for spare parts. I cracked an AG g/ box case and a shop here did that for me. Good service I thought.
You might be lucky.
Grahame
-
27th July 2014, 11:25 AM #4Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 114
Thanks for the suggestions guys, I will look into it this week .
Regards
-
4th August 2014, 09:08 PM #5SENIOR MEMBER
- Join Date
- Feb 2010
- Location
- Ballina, NSW
- Posts
- 725
Just a thought - Aldi have 125mm grinders going cheap at the moment ($30) https://www.woodworkforums.com/187045...angle-grinder/. The guards are removable and have an adjustable collar, so.... - might fit?
-
4th August 2014, 09:57 PM #6Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 114
Thank you Mick, guess where I am going tomorrow
-
6th August 2014, 07:57 AM #7
-
11th August 2014, 06:34 PM #8SENIOR MEMBER
- Join Date
- Apr 2008
- Location
- Canberra
- Posts
- 816
How did you go Doc Bug? I found them for sale online, but jeez...over $50 delivered.
Bosch Accessories 2605510172 Safety Guard FOR Angle Grinder Without Cover 125 MM | eBay
As mentioned earlier - not sure what tools you have in your shop but these are pretty easy to make at home. I made one for my 9 inch grinder and it didnt take long.
-
11th August 2014, 07:46 PM #9GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
-
11th August 2014, 07:51 PM #10Senior Member
- Join Date
- Sep 2008
- Location
- Riddells Creek
- Posts
- 300
Most guards I have seen are unique to that particular make of machine, I think you will be lucky to find something that will fit straight on unless it is from the same make and model.
-
11th August 2014, 09:11 PM #11Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 114
Yeah the pricing is horrendous, I have a few repairers looking out for one, failing that I'll tig one up out on 1.6mm plate and see how that works. It's just for a grinder with a flap disk so not that critical
-
12th August 2014, 12:46 AM #12
Just in case you haven't looked at the Aldi one: it has a VERY adjustable collar with an over-centre lever and would fit quite a few angle grinder bosses. I got to look at the one my dear wife bought for me last week.
By the way, the Aldi $30 special comes with just a cut-off guard (covered on both sides) and the grinding guard is an optional extra.....Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
12th August 2014, 12:25 PM #13Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 114
Just waiting for more specific measurements of the unit, should have it today
-
15th August 2014, 10:40 PM #14
Horrendous? Nee, cheap as chips.
http://www.acetoolonline.com/Makita-1252727-WHEEL-COVER-ASS-Y-p/mak-125272-7.htm
$6 + Free postage from Hong Kong
http://www.ebay.com.au/itm/Metal-Ang...f18ff17&_uhb=1If it does not fit ask if they have one for your size.
Can't beat $6 and free postage.
Otherwise, buy a new grinder for $60 take the cover, sell it for $50 and bob is your uncle.
http://www.ebay.com.au/itm/MAKITA-12...43f1eb3&_uhb=1“We often contradict an opinion for no other reason
than that we do not like the tone in which it is expressed.”
Friedrich Nietzsche
-
17th August 2014, 02:20 PM #15Senior Member
- Join Date
- Jul 2009
- Location
- Melbourne
- Posts
- 114
Similar Threads
-
4' or 5' angle grinder
By wodstok in forum WELDINGReplies: 65Last Post: 7th March 2011, 06:49 PM -
Cordless angle grinder
By Rossluck in forum WELDINGReplies: 15Last Post: 10th May 2009, 03:19 PM -
What size angle grinder ??
By PlanePig in forum METALWORK FORUMReplies: 24Last Post: 29th April 2009, 08:55 AM -
How do you set your angle for the grinder?
By jmk89 in forum SHARPENINGReplies: 4Last Post: 7th October 2007, 08:30 AM