Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
4th April 2020, 08:10 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,425
130 amp gas/gasless mig welder [rossi,edisons]
hi,this welder was approx $ 230 two years ago.I Bought this unit just as a starting point to do small jobs around the house nothing too serious as it is only on a 10 amp plug.Anyway i did not receive a manual with this product,and after chasing this up with the ebay seller's they did not help me out in any way. I presumed that this welder was factory set for gasless welding so i started welding and it was not so bad for a beginner anyway. I have also wanted to try welding mild steel using a shielding gas,and again no help from the seller.On other mig welders it is a simple process to swap over the priority [negative and positive terminals] [torch positive clamp on negative] i am confused on what to do when i open up the box,as i do not want to get electricuted.
I would appreciate some help on doing this the correct way,i know it maybe just a cheap welder to most here but i am desperate to get it going before i throw it through the window. And also is 75/25 argon and c02 the correct gas for mild steel. I will a photo up if it allows me to. All i can see inside the box is 2 black wires with 8mm nuts i am confused as i do not know if this is what i am supposed to swap around or not.
I Will appreciate any help at all. My first project was fishing rod holders and small gadgets,and next hopefully an electric scooter.
Attached Images
- P4030437.jpg (144.2 KB)
- P3240400.jpg (201.6 KB)
Read the full thread at metalworkforums.com...
-
4th April 2020 08:10 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Mig Welder Gas/Gasless Metal Thickness
By Oldneweng in forum WELDINGReplies: 11Last Post: 22nd March 2015, 10:36 PM -
Chinese Mig Welder- Rossi 185E, Mishto185E, Rolwal 185E IS IT ANY GOOD FOR THE MONEY?
By ArthurPendragon in forum WELDINGReplies: 7Last Post: 27th January 2014, 09:27 PM -
whats a good welder? welding 10mm / 12mm steel mig gas or gasless wood fire heater
By makitaLXT in forum WELDINGReplies: 3Last Post: 30th June 2013, 10:58 AM -
Adviced needed on gasless Mig welder
By Big Shed in forum WELDINGReplies: 13Last Post: 29th June 2007, 06:13 PM