Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Ally gassless mig?
-
6th June 2013, 09:26 PM #1
Ally gassless mig?
As he title suggests, can 3mm and 4mm ally be welded using a gassless mig? Thanks in advance as wood is good and metal is mental. Damien.
I'm a dancing fool! The beat goes on and I'm so wrong!!!!
-
6th June 2013 09:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th June 2013, 09:38 PM #2
Don't even try - it'll all end in tears. Get a TIG and buy (rather than rent) a cylinder of Argon (search the forum, there are places that will sell and refill the cylinders)
If you must do it on the cheap, the aluminium brazing rods that you use with a butane torch might be the way to go.
-
6th June 2013, 09:44 PM #3Senior Member
- Join Date
- May 2013
- Location
- Gracemere
- Age
- 46
- Posts
- 161
No. There is no self-shielded wire available for GMAW on aluminum, therefore exterior shielding must be supplied, normally argon gas.
-
6th June 2013, 10:02 PM #4
Thanks. Damien.
I'm a dancing fool! The beat goes on and I'm so wrong!!!!
-
7th June 2013, 07:51 PM #5Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 55
Have you tried arc welding ally
There are harris electrodes which will do a reasonable job (with a bit of practice)
For around $50.00 a packet
-
7th June 2013, 09:50 PM #6
There is flux cored wire for both aluminium and stainless but both also require the use of a shielding gas as well.
Dean
-
7th June 2013, 10:04 PM #7GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Similar Threads
-
Gassless mig / Porosity
By BigPete1 in forum WELDINGReplies: 2Last Post: 10th February 2013, 11:47 PM -
MIG Welder - Gas/Gassless?
By Blu_Rock in forum WELDINGReplies: 16Last Post: 4th December 2011, 11:19 AM -
Gassless wire quality?
By Single-phase in forum WELDINGReplies: 5Last Post: 5th January 2011, 06:35 AM -
Gassless Mig Welding
By Com_fa_ta_bull in forum WELDINGReplies: 8Last Post: 7th September 2009, 03:02 AM -
When Ally aint Ally!
By BobL in forum METALWORK FORUMReplies: 22Last Post: 21st January 2008, 11:36 PM