Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    johnyjamtin Guest

    Default aluminum arc welding

    I used to work as a welder many years ago: mainly arc/oxy welding steel and brass with the occasional foray into aluminium welding with oxy. I just bought some aluminium arc rods with the intention of learning to use them with my CIG DC unit - didn't go too well though - just can't seem to maintain an arc. I know Tig is the way to go, but for the amount of aluminium welding I'd do, just can't justify the outlay. So any tips would be appreciated.

  2. # ADS
    Google Adsense Advertisement





     
  3. #2
    Join Date
    Sep 2010
    Location
    Lebrina
    Posts
    1,099

    Default

    I am by no means and expert on MMA of aluminium, in fact I've never done it.
    My understanding though is that DC electrode positive or reverse polarity as the yanks term it, teamed with a short arc length is the general setup of the process. I am also lead to believe that it is very touchy as far as power level goes. Lincoln Electric, in their book "New lessons in arc welding, second edition" spoke of the process at length, but I cannot find my copy and have not seen another for sale.
    What electrode type and size are you using?
    If you are having trouble holding an arc, then my two thoughts would be either a little more power, or quite possibly increasing your rate of feed as these electrodes are consumed rather rapidly as I understand it. These two approaches are diametrically opposed, so you will need to identify why your arc is extinguishing first, before you can correct the situation.
    Keep us posted as this could be an interesting thread.

  4. #3
    Join Date
    Jun 2010
    Location
    Canberra
    Posts
    769

    Default

    This guy, who looks like Cletus the Slack Jawed Yokel, had a go with them without much luck:
    https://www.youtube.com/watch?v=dIIp3f7xV8g

  5. #4
    Join Date
    May 2011
    Location
    Murray Bridge SA
    Posts
    3,339

    Default

    I have used them about 40 years ago. From memory, high amps and they disappear in about 30 seconds. Was welding the lugs on the gearboxes of chain driven concrete mixer bowls. We had to heat the ally well and truly first though.
    Kryn

  6. #5
    Join Date
    Oct 2011
    Location
    Adelaide
    Age
    59
    Posts
    3,149

    Default

    Quote Originally Posted by johnyjamtin View Post
    I know Tig is the way to go, but for the amount of aluminium welding I'd do, just can't justify the outlay.
    Have you something specific in mind or was it just because you can? I have a friend who refuses to touch Al with a welder simply because he maintains that to maintain proficiency you need to do it regularly. If it was just a small one off I'm sure there is someone near who could throw some hot metal around for you.

    Michael

  7. #6
    Join Date
    Sep 2008
    Location
    Perth
    Posts
    363

    Default

    You could find a cheap tig torch for your welder and a bottle of helium and try that ... apparently.

  8. #7
    Join Date
    Sep 2010
    Location
    Lebrina
    Posts
    1,099

    Default

    While you can weld ally using DCEP, it takes a fat electrode and a lot of amperage to get anywhere. I did it at a TAFE college once just for the heck of it. I think we hit the 3mm ally with around 160-170A, using a 3.2 or even 4mm electrode from memory and the weld was really wide - as you would expect from the heat input.
    I can see a place for ally stick welding in a site/maintenance welding application, but there are a lot better processes overall. I seem to remember that the Lincoln bible also mentioned the use of the ally electrodes for oxy acetylene welding of ally as well.

Similar Threads

  1. CA over Aluminum??
    By JTTHECLOCKMAN in forum WOODTURNING - PEN TURNING
    Replies: 2
    Last Post: 14th March 2012, 10:26 PM
  2. Some aluminum mig welding.
    By aametalmaster in forum WELDING
    Replies: 6
    Last Post: 7th June 2011, 01:15 AM
  3. Another Aluminum
    By Mike in Nanaimo in forum WOODTURNING - PEN TURNING
    Replies: 11
    Last Post: 4th February 2011, 11:43 AM
  4. My Aluminum pen
    By Resination in forum WOODTURNING - PEN TURNING
    Replies: 6
    Last Post: 15th December 2009, 12:29 AM

Members who have read this thread: 0

There are no members to list at the moment.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •