Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
16th May 2021, 12:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
The argon flows only when I shut the cylinder valve off
Hi,
I a beginner, just finished my first argon bottle and when I replaced it, reconnected everything, I realized that the flow wasn't going any higher than 3 lpm.
After some debugging, I verified that the flow spikes once I shut the cylinder valve down, topping up the flowmeter until there isn't any pressure in the regulator.
The cylinder pressure is at 2650 psi.
I posted a video to better explain:
How do I fix this?
Thank you
Read the full thread at metalworkforums.com...
-
16th May 2021 12:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
What to do now the Shed is shut
By Arfur in forum MEN'S SHEDS / MEN IN SHEDSReplies: 2Last Post: 9th April 2020, 05:47 PM -
Is there an alternative to renting an argon gas cylinder?
By SimonP in forum WELDINGReplies: 135Last Post: 2nd June 2015, 12:04 AM -
E versus G argon cylinder pricing
By WelderMick in forum WELDINGReplies: 7Last Post: 1st July 2011, 01:19 AM -
How much Argon left in cylinder?
By matt_o in forum WELDINGReplies: 8Last Post: 28th November 2007, 06:00 PM