Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: bell repair
-
26th April 2022, 05:00 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,436
bell repair
As some here know I make bells. The bells are made using bell metal, 80%cu 20%sn, I have a bell that has a cavity in the very top of the bell where some clay had dislodged from the mold and lodged itself in the top of the bell. Fortunately it does not affect the performance of the bell but it does reduce the hanging strength.
My question is would silicone bronze mig welding do the trick to fill the cavity, any tips and advice would be appreciated?
Attached Images
- bellcavity.jpg (122.0 KB)
Read the full thread at metalworkforums.com...
-
26th April 2022 05:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
30th bell
By MWF FEED in forum THE FOUNDRYReplies: 0Last Post: 29th January 2022, 03:40 PM -
Bell Mouth in PVC
By Chris Parks in forum DUST EXTRACTIONReplies: 15Last Post: 4th December 2016, 07:23 PM -
For Whom the Bell Tolls
By Stuart in forum WOODIES JOKESReplies: 0Last Post: 28th April 2008, 10:52 PM -
Ring a bell??
By fxst in forum WOODIES JOKESReplies: 3Last Post: 6th February 2005, 02:28 AM