Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
20th September 2011, 09:54 PM #1Intermediate Member
- Join Date
- Jan 2010
- Location
- Sydney Australia
- Posts
- 42
About to buy a TIG. Any comments or suggestions before I purchase?
Hi all, I'm an ex panel beater with many years of MIG welding experience but minimal time on a TIG. I've been out of the trade for a while now but still keep my eye in every now & again on steel.
I've finally gained permission to buy a TIG for the home garage & at this point I'm leaning towards one of these based on feedback on this site.
Welding AC DC Tig inverter welder 200 amp tig welding machine tig welders Alupulse including foot control and gas regulator
200 amp AC/DC with a foot pedal & reg for $1600.
It'll be mainly used for light alloy work, 5mm & under & primarily for work on the tinny (boat).
Does anyone have any current feedback on these, any concerns, any suggestions etc before I cough up the money?
Thanks.
Al
-
20th September 2011 09:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st September 2011, 08:28 PM #2SENIOR MEMBER
- Join Date
- Feb 2010
- Location
- Ballina, NSW
- Posts
- 725
I've go the older alusync 200 which has a similar feature set to this model. I'm very happy with it and the company - search for some of my previous posts. 50% of my welding would be on aluminium including the tinny. Cheers - Mick
-
25th September 2011, 09:38 AM #3Senior Member
- Join Date
- Dec 2010
- Location
- NINGI Qld Australia
- Age
- 68
- Posts
- 210
Yeah I bought a similar spec but 3phase machine, powertig 250EX about a year ago, and with my limited experience seems do perform nicely on all metals. The TT machines seem to be supported here in Aus too being handy and I would imagine perform well from alll reports.
-
26th September 2011, 10:36 PM #4Intermediate Member
- Join Date
- Jan 2010
- Location
- Sydney Australia
- Posts
- 42
Thanks guys.
Al
Similar Threads
-
Comments welcome
By rogerjenkins in forum SCROLLERS FORUMReplies: 6Last Post: 2nd July 2011, 06:31 PM -
Any Comments??
By Phil Spencer in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 7Last Post: 4th July 2010, 09:59 PM -
Some comments
By artme in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 8th February 2010, 06:54 PM