Hi all,
I have a 250amp CIG mig as a welder at home, it was working fine yesterday, then today when i powered it up, the cdc6-32 contacttor? randomly clicked on and off numerous times. I Powered down unit, then upon repowering, the fan runs but that is it. the power light on front of unit is not illuminated and the service manual says blown Primary fuse. From what i can find the machine only has the 2 circuit breakers which both test ok.
Has anyone had this issue and can point me in the right direction as to what the problem may be??
i'm reasonably handy with electrionics, and have run through and tested everything i can think of but cant find anything that seems out of sorts.
Any help to diagnose my issue would be greatly appreciated.
Cheers Dan


Read the full thread at metalworkforums.com...