Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: Advice on a tig
-
30th December 2011, 10:38 PM #1future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Advice on a tig
My neighbor has a kemppi Mastertig 2300 tig welder For sale.are these a good machine and what would I expect to pay for one. He said I can have A lend for a weekend he will give me the gas and some
Aluminium to practice on.BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
30th December 2011 10:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st December 2011, 09:09 AM #2Senior Member
- Join Date
- Dec 2010
- Location
- NINGI Qld Australia
- Age
- 68
- Posts
- 210
Well, assuming it's an AC/DC machine in good condition I would think it would be an excellent machine.
It is hard to say a value without knowing what state it is in, how old etc but I would say that if it has been looked after and in good condition including accessories it would be $2,500 upwards.
-
31st December 2011, 01:18 PM #3future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
I asked he wanted around 2000 so I thought I would offer 1800 of I can afford it. It has a torch a half full argon bottle and a. Tonne. Of aluminium to practice on.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
31st December 2011, 01:45 PM #4SENIOR MEMBER
- Join Date
- Feb 2010
- Location
- Ballina, NSW
- Posts
- 725
See what else he's selling with it - tungsten, cups, gas lenses? make sure the leads are in good repair, and both the little finger rests are on the tig torch. I'm not familiar with that model but have been using a Kempii mastertig 2500 a bit and it's a nice machine. I'm not sure what market price is, but $1800 seems like a good deal. Cheers - Mick
-
31st December 2011, 02:35 PM #5future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
I asked he wanted around 2000 so I thought I would offer 1800 if I can afford it. It has a torch a half full argon bottle and a. Tonne. Of aluminium to practice on.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
31st December 2011, 05:47 PM #6Senior Member
- Join Date
- Dec 2010
- Location
- NINGI Qld Australia
- Age
- 68
- Posts
- 210
Sounds like a good deal at $2,000, but without seeing it, bit hard to judge so you will have to weigh that side of it up.
-
31st December 2011, 11:21 PM #7future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Not sure but it was only used once to fix a boat. It comes with the torch a pile of filler rods and an illegal argon bottle which is full. It's tempting but I am not sure how much I will use it as an apprentice machinist
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
1st January 2012, 11:09 AM #8
the Model Mastertig 2300 currently sells around $5500.
1/3 of that value is an exceedingly good value for money for a high quality unit that will last you many years.
Happy New year
Grahame
-
1st January 2012, 08:08 PM #9
I wouldn't ponder for to long because you will miss out...It's happned before and it will happen again..
I would have jumped at it first and worried about price second..LOLWarning Disclaimer
-
1st January 2012, 10:09 PM #10future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
I would jump on it straight away if I was older but being 16 makes it difficult it would take alot of weekend at my job earning 10 an hour to pay it off. Although when I get 800 for tools from the government I may be able to afford it.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
1st January 2012, 10:16 PM #11Senior Member
- Join Date
- Dec 2010
- Location
- NINGI Qld Australia
- Age
- 68
- Posts
- 210
Sent you a PM.
-
28th January 2012, 03:03 PM #12Member
- Join Date
- Jan 2009
- Location
- Adelaide
- Posts
- 71
how old is this machine, $2500 is a good price to grab a kemmpi
-
10th February 2012, 08:50 PM #13Retired
- Join Date
- Aug 2008
- Location
- Liverpool, NSW
- Posts
- 55
$2000 for a MasterTIG 2300 is a STEAL!!! There was a bit of a survey on MIG Welding - The DIY Guide some time ago on what are the best welders money can buy and this particular model was considered the Rolls Royce of TIGs (Fronius were considered the best of the MIGs in case someone is interested).
If it is in decent condition, buy it. If not, please PM ME and I will buy it. But for gods sake, quickly before your neighbour changes his mind!
Just to confirm; this is the box we are talking about?
MasterTig MLS ACDC | Kemppi
-
17th February 2012, 10:01 PM #14Novice
- Join Date
- Aug 2011
- Location
- Mudgee
- Posts
- 21
I'll buy it if you don't
Similar Threads
-
Advice on what to buy please
By TimberNut in forum SHARPENINGReplies: 24Last Post: 9th June 2016, 03:21 PM -
need advice desperatly - train trip advice for a smoker!
By Spanner69 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 11Last Post: 12th June 2010, 03:36 PM -
Best Advice #2
By Black Ned in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 3rd December 2007, 01:30 PM -
Your advice please..
By Slow6 in forum WOODWORK PICSReplies: 16Last Post: 23rd November 2006, 10:29 AM