Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
16th February 2020, 12:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
Finally getting somewhere with stick welding
Had to play around with amps at first varying between 60-80amps 2.4mm or 2.6mm Gemini rods (no amp recommendation on packet) ended up at 75amps
Welds look ok to me, what do u think? There is a bit of bite but any less amps i was getting cold welds
This is 10mm rated trailer chain welding to 100x100x5mm shs
Attached Images
- 20200216_103032.jpg (98.1 KB)
- 20200216_102701.jpg (108.3 KB)
- 20200216_102711.jpg (84.3 KB)
- 20200216_103026.jpg (112.8 KB)
Read the full thread at metalworkforums.com...
-
16th February 2020 12:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Help a beginner - stick welding
By mhewitt in forum WELDINGReplies: 16Last Post: 1st July 2013, 05:51 PM -
old stick welding m/c
By gpigeon in forum WELDINGReplies: 24Last Post: 27th March 2012, 07:06 AM -
Mug stick welding 8mm steel rod
By Scally in forum WELDINGReplies: 9Last Post: 12th July 2008, 11:23 PM -
What you always wanted to know about stick welding P1
By Grahame Collins in forum WELDINGReplies: 2Last Post: 18th December 2007, 10:14 PM -
Stick Welding
By Grahame Collins in forum WELDINGReplies: 51Last Post: 17th September 2007, 11:10 AM