Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
26th October 2019, 04:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Looking for a new inverter AC/DC TIG - foot control and CK Flex WP17 required
I do a bit of auto and motorsport fab stuff, and my almost 10yo Super 200P is starting to give me some grief with the limitations, and tripping the 10A circuit when i set the 'arc force' too high. So thinking a new welder might be in store.
Was originally thinking about one of the UniMig Razor 200s (W1721 - RAZOR DIGITAL PULSE AC/DC 200 AC/DC Inverter TIG/ARC Welder | Hare & Forbes Machineryhouse) which a few friends have, and love, but the interface is somewhat clunky. However, i was picking up some random bits at Bunnings the other day, and saw the Bossweld unit (https://www.bunnings.com.au/bossweld...elder_p6380047) and recognised the brand from Hampdons who evidently sell the same unit (https://www.hampdon.com.au/bossweld-...ig-welder-240v). Even with the foot controller added on, it is ~$500 cheaper than the UniMig, and from the certification diagrams that i looked at in Bunnings, seems to be very similar internally (of course I cant pull apart the machine to look).
I also had a look at the local BOC, and they were trying to sell the Smootharc, but it only had a 2pin remote, so only on and off from what i could tell. No footpedal listed for that item.
Meanwhile another friend swears by Alumtig, which sounds like a cheap Chinese thing but looks reasonable: https://swswelding.com.au/products/a...e-in-australia
Only problem is that he is 2000km away so no opportunity for a roadtest.
The other option out there is the TokenTools which gets high reviews on here, but I have no way of being able to look at it or test it in person.
So, has anyone used the Bossweld for any length of time, and/or can compare it to the UniMig Razor? Similarly any comparisons with the Alumtig.
Oh and compatibility with a CK Flex WP17 is required, not that it should be incompatible with anything, but may as well state it.
Also, Im not flush enough for a Kemppi.
Read the full thread at metalworkforums.com...
-
26th October 2019 04:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Foot control switch for Excalibur Saw ?
By Pariss in forum SCROLLERS FORUMReplies: 4Last Post: 15th September 2015, 11:42 PM -
Engineering help please - flex in stainless tube and motor power required for spit
By 19brendan81 in forum METALWORK FORUMReplies: 19Last Post: 19th September 2013, 10:04 AM -
TIG foot control for Chinese welder
By Pete F in forum WELDINGReplies: 16Last Post: 4th August 2011, 03:36 PM -
flex drum
By big chisel in forum INTARSIAReplies: 2Last Post: 7th June 2011, 07:01 PM -
Ideas to mod cheap TIG to take foot control?
By SiJ in forum WELDINGReplies: 4Last Post: 15th November 2009, 09:27 PM