Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Mini Mig gas hose adaptor
-
4th August 2013, 12:43 PM #1New Member
- Join Date
- Aug 2013
- Location
- Tasmania
- Posts
- 2
Mini Mig gas hose adaptor
Hi,
I have read about how you can get adaptors to go from 4mm to 5/8" connection for regulators for large gas bottles.
Does anyone know anywhere in Australia that sells them ? I have seen the bossweld one on the dynaweld site but was wondering if there were any others.
Thanks
-
4th August 2013 12:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th August 2013, 08:53 PM #2Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 55
Like this one
GAS Regulator Disposable Bottle TIG MIG Welding | eBay
-
4th August 2013, 10:04 PM #3New Member
- Join Date
- Aug 2013
- Location
- Tasmania
- Posts
- 2
I mean the ones that allow large bottles to be used with mini migs
-
5th August 2013, 07:48 PM #4Member
- Join Date
- Sep 2011
- Location
- Sydney
- Posts
- 55
-
7th August 2013, 06:39 PM #5New Member
- Join Date
- Aug 2013
- Location
- Brisbane
- Posts
- 1
adapter
Hello ,
you may be best off to adapt down with pushfit type fittings for pneumatic lines. I recently used a mini-mig set up in this fashion. They had used two different fittings but you may well be able to reduce down in a single step as the regulator should have a b.s.p. thread in it and the mig will have 4 or 6 mm nylon tube to connect to it's gas bottle.
Regards,
Neddy Seagoon
Similar Threads
-
chuck adaptor
By bobsreturn2003 in forum WOODTURNING - GENERALReplies: 5Last Post: 13th October 2010, 04:49 PM -
Does anyone sell a "3 x Vac-Hose onto 100mm" Adaptor?
By Batpig in forum DUST EXTRACTIONReplies: 0Last Post: 31st July 2010, 12:52 PM -
adaptor
By Fireman sam in forum WOODTURNING - GENERALReplies: 7Last Post: 26th June 2007, 06:26 PM -
Jet mini versus Leda mini
By bloggs1968 in forum WOODTURNING - GENERALReplies: 18Last Post: 15th August 2006, 10:03 PM -
Adaptor to fit Triton dust hose to Belt Sander
By silentC in forum TRITON / GMCReplies: 18Last Post: 18th October 2003, 09:10 AM