Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
12th August 2019, 06:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,436
Prep advice? Going to tig this hole
Going to weld up this hole first option was mig but i dont have a teflon liner so going to fire up the tig and have a go, i have a piece if 100x50x3 brass backing shop didnt have copper
Any advice on cleaning? I am know to be not so clean and get impurities in the weld
Finger is for reference, was quoted $200 to repair, $300 for a new starter but i need the practice
Attached Images
- 20190812_163652.jpg (95.5 KB)
- 20190812_163714.jpg (88.9 KB)
- 20190812_163811.jpg (78.4 KB)
- 20190812_163839.jpg (88.5 KB)
- 20190812_163847.jpg (86.6 KB)
Read the full thread at metalworkforums.com...
-
12th August 2019 06:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Pocket hole jig advice?
By MattB2085 in forum WOODWORK - GENERALReplies: 16Last Post: 13th August 2018, 02:10 PM -
Arbor & hole-saw advice
By PaulWG in forum GENERAL & SMALL MACHINERYReplies: 7Last Post: 8th July 2013, 11:04 PM -
Advice re cutting hole in plastic box
By grunto in forum CNC MachinesReplies: 19Last Post: 12th May 2013, 02:04 PM -
Hole Saws Advice Needed
By JiffyRobert in forum TOY MAKINGReplies: 11Last Post: 19th March 2010, 10:26 AM -
Pocket Hole jig advice
By John G in forum WOODWORK - GENERALReplies: 14Last Post: 1st September 2009, 03:02 PM