Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
1st August 2021, 12:00 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,431
Transmig 195 wire feed not working
Help....I have just acquired an old Transmig 195, the wire feed will not engage when the trigger is pressed, you can hear the relay click but nothing from the wire feed. I have connected the wire feed motor to a 12v battery and the motor turns, I have checked the fuse and it looks intact and I have checked continuity on the trigger switch wires and they are ok. I have also checked the wire for moving through the liner and it pulls through, I have checked the spade end contacts.
I have kicked it and shouted at it but it is still not wanting to play!!
Have the gurus got any other ideas, as the next step is FIRE!!
PS Does anybody know where to get a new handle and trigger.
TIA
Read the full thread at metalworkforums.com...
-
1st August 2021 12:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
CIGWELD 130 Twin Wire feed
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 11th February 2019, 01:50 PM -
RSS feed for woodworkforums stopped working yesterday
By joez in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 1Last Post: 19th November 2013, 06:58 PM -
RSS Feed not working for forum
By joez in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 2Last Post: 24th October 2012, 11:03 PM -
RSS Feed not working
By jonesy007 in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 1Last Post: 1st September 2008, 12:22 AM -
Wire feed problems "need help"
By Stufart in forum WELDINGReplies: 6Last Post: 14th April 2008, 07:44 PM