Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: An update on me mig!
-
7th August 2007, 09:18 AM #16
G'day All.
I run 0.6mm wire with Migshield gas.
Bought 4 x 15kg rolls off Ebay and respool it onto the 5kg spools.
It is used for everything from car panels right up to 10mm plate.
Just change the settings and weld away.
I use a CIG transmig 165.
Also run 0.8mm ali wire with argon. Works great but have to pre-heat the work with a cheap throwaway bottle gas blowtorch.Hooroo.
Regards, Trevor
Grafton
-
7th August 2007 09:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th August 2007, 10:25 AM #17
Thanks Grahame and Ding,
I think the welding will go in spaced bursts of frantic activity with the odd small job in between. So a Gas/Gasless unit with a gas bottle hired for the bigger jobs looks like the way to go.
I need to do a bit more research i think. Still not clear on what gases do what and what type of regulator etc..etc...Those were the droids I was looking for.
https://autoblastgates.com.au
Similar Threads
-
Advice on Gasless MIG welders
By Bodgy in forum WELDINGReplies: 19Last Post: 14th January 2007, 11:24 AM -
211v enough for MIG??
By benboy in forum WELDINGReplies: 6Last Post: 24th August 2006, 12:33 AM -
Current set up for your Mig
By Grahame Collins in forum WELDINGReplies: 23Last Post: 7th July 2006, 11:29 AM -
More on MIG selection
By Grahame Collins in forum WELDINGReplies: 12Last Post: 1st April 2006, 04:38 PM -
MIG for beginer
By Gaza in forum WELDINGReplies: 9Last Post: 19th February 2006, 07:11 PM