Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: voltage settings aust / usa
-
17th July 2010, 07:16 PM #1dave the plummer
- Join Date
- Nov 2009
- Location
- adelaide
- Posts
- 26
voltage settings aust / usa
trying to run core shield 8, 2mm last swing out in the bush and had dramas. went on the net and got voltage settings and stuff and computer said 23 volts and 350 ipm wire feed. set machine up like that and no good.( lincoln vantage and, yes, LN25.) went up to 28-29 volts and hey not bad. question.....are american volts different to australian volts in that our 240 is different to their 110 or whatever and our 50 hertz etc.....
-
17th July 2010 07:16 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th July 2010, 07:44 PM #2
The difference could be in your supply from the GPO
Some times when running off a grid system peak hour so to speak delivers less volts than than what the GPO is rated at.
If the GPO is only passing 220 volts ,maybe someone up the road is running the swimming pool filter and 2 airconns and you only seeing whatever is left over at your GPO.
Simple physics says if less goes in less comes out,Jot you setting down(-used to write power settings on the machine itself for next time.)
Does it help?
Grahame
-
17th July 2010, 09:43 PM #3New Member
- Join Date
- Jun 2010
- Location
- perth
- Posts
- 8
I use different Lincoln generators, a Vantage 575 and a 405 Ranger with LN25. And the volt settings seem to be way different it always confuses me. I use about 23v on vantage and 27 on the ranger. Not sure if helps.
-
18th July 2010, 06:21 PM #4dave the plummer
- Join Date
- Nov 2009
- Location
- adelaide
- Posts
- 26
yeah thanks, LN25's can be a real pain in the #### at times and they've usually got dozens of different paint marker dots or scratches around the dial where previous blokes have marked their settings.....pick one and run with it.....the voltage thing is a curly one, trial and error is usually the go.
Similar Threads
-
Mig settings for 6mm steel?
By montiee in forum WELDINGReplies: 6Last Post: 22nd September 2009, 08:47 PM -
Current settings
By john beaton in forum WELDINGReplies: 1Last Post: 13th January 2009, 07:03 PM -
TIG Welding settings
By Watts2759 in forum WELDINGReplies: 14Last Post: 27th June 2008, 01:16 PM -
Amp settings
By Unit_01 in forum METALWORK FORUMReplies: 21Last Post: 22nd October 2007, 05:06 PM