Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
26th December 2023, 11:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,434
Welding method/connection to T join 150*50mm RHS rafter to 90mm SHS column
What would be the suggested method of making this weld connection, that is to weld the 50mm edge of the RHS to the top end open end of the 90mm SHS ? Is it best to weld a section of plate/flat bar on the end of the 90mm SHS and than fillet weld the rafter on top of that or is notching a portion out of the the 90mm SHS for the 150x50RHS to rest, similar to a half lap joint just as good?
90to50Connection.jpg
Attached Images
- 90to50Connection.jpg (13.3 KB)
Read the full thread at metalworkforums.com...
-
26th December 2023 11:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Which join method gives Strongest bond?
By Tegmark in forum WELDINGReplies: 9Last Post: 17th June 2015, 05:59 PM -
Where to buy 90mm x 90mm Pine in Perth
By Arry in forum TIMBERReplies: 4Last Post: 30th April 2014, 11:36 AM