1 Attachment(s)
Size of zero clearance inserts
Ben+, who sold me my machine (Thanks Ben, great find) has kindly cut me some perspex inserts for the zero-clearnace hole in the table, as mine was missing anything there. The wider hole at the top surface fits the 31 mm inserts that Ben cut for me and the lower section of the hole fits the 25.4 mm insert perfectly. I have included photos here, with the 31 mm insert shown exactly fitting the hole and the 25.4 mm insert section on the table surface. the photos were taken before I bored the hole to take the blade. I bored a circular hole - not a slot - as I can feed each new blade straight through the insert - unlike a bandsaw, which needs a slot as the blade is continuous.
Attachment 301186