Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 21 of 21
Thread: Daniel's J.A.Fay Bandsaw.
-
29th July 2013, 08:11 AM #16
Great score Matty,
My first bandsaw was a 24 inch Crescent from the US similar blade guides and plain bearings,guards the same also.
A mate who was an aircraft sheet metalworker made me guards from gal steel.
Sold it to buy my 30 inch Barker.
I worked at SG White's Ballina slipway and engineering in the 70s and they had a few large dead bandsaws sitting out front of the foundry. Never took any pics unfortunately.
The saw I used as patternmaker was a 36 inch from memory with basic guarding.
It broke a blade a week so I ended up with a fair idea of where not to stand when using these machines. The dead saws out the front may have been better than the one in use?
I think there was a lot more of this gear around than we realise.
At Ballina by this date they were building both steel and timber trawlers but most of the other wooden trawler builders had quit.
I think McClarens at Immigrant Creek and the guys at Hargrave were the only ones left.
They even made the Barlow stationary engines there years earlier
May have some pics of them steam bending the spotted gum for the hulls somewhere.
We used wine flagons for flux in the cupola when pouring iron.Always had a few beers at the 'Pot' after a pour and the new owner would shout a keg when his trawler was launched.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
29th July 2013 08:11 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th July 2013, 03:42 PM #17SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 775
Hi all,
Just to get in on the action, this is some more from the same 1894 J.A.Fay catalogue that Matty has (sorry about the angled shots, the cover on my book is not in the best of condition and I don't want to risk playing with it too much until I can get it looked at):
Introduction and the certificate from the 1989 International Exposition held in Paris, thought it might help to give some insight as to what was going on at the time this bandsaw was in production.
1.jpg2.jpg3.jpg
The list of agents in Australia for these machines, note that it lists Queensland, Victoria & NSW, the badge on Matty's bandsaw only lists Sydney. Could this mean it is an earlier build date that the time of this catalogue??
a.jpg
I decided to look up the Sydney address, just to get an idea of the distributors location compared to the city. Assuming the street is the same and has not been renamed/zoned, this would be the current location:
map.jpg
I was surprised at how close it was to the Sydney Harbour Bridge, but then I remembered we are talking circa 1880's, the bridge wasn't started until 1923 and not completed until 1932, puts the age of the bandsaw into perspective.
Cheers,
Camo
-
31st July 2013, 12:05 AM #18danielson
- Join Date
- Dec 2009
- Location
- broadford
- Age
- 63
- Posts
- 237
g,day matty and you too rob,
Matty I reckon your a bastard for making me sell that saw,im missing it badly,you should never have raised the issue of selling it.
The one and only consolation is that its back in a woodworking home and will be cared for.look forward to seeing its restoration progress.Now,about that monogram blower,mmmmm,powder coat Royal Blue?
-
31st July 2013, 09:28 AM #19
Thanks Henry, my brother and I actualy restored a 1909, 32 inch Crescent for the old man, so I am familiar with them, nice old bandsaw.
Love hearing you stories/expierences Henry, sounds like you have done many things in you life, great to have such a wide scope of knowledge.
These Car's of yours I would like to hear more on one day, I do a little panel beating on the side now and then, so restoration work on old car's interest me.
Camo, your a star, thanks mate for putting up that information !
Cam, this H.P.Gregory company interests me, might have to do some sniffing around the internet some more, I did some a while back and found some great adverts in some old news papers stating also that H.P.gregory were merchants for J.A.Fay.
Daniel, you are right, but I am a very Happy bastard indeed, last few days I have been on cloud 9, found a guy to re rubber the wheels as well !!
It is with out doubt a beautiful machine, and I hope to do a really thorough job in restoring it !
I meant to say also found a Home for that grey Blower and passed it on to Rob, he was very happy as he is re-building his dust system soon, so thank you again !
speaking of blowers, your other little one with all the decoration I would paint in a dark grey colour, it will look great !!
Melbourne Matty.
-
31st July 2013, 10:48 PM #20
LOL , I was laughing out loud when I read this. Hi Daniel.
Thanks for the blower Daniel and Matt, it looks like its going to blow like Mad , that circumference and the HP , I think it was 3 HP or was it 5 ?? either way it should do the job. my system has been a little weak since adding a few extra machines a few years back.
Rob
-
1st August 2013, 12:15 PM #21danielson
- Join Date
- Dec 2009
- Location
- broadford
- Age
- 63
- Posts
- 237
Similar Threads
-
You call that a bandsaw? This is a bandsaw
By AlexS in forum BANDSAWSReplies: 18Last Post: 21st June 2011, 12:26 AM -
Bandsaw for only the SMARTEST of Buyers -Bandsaw in Excellent Condition
By prozac in forum BANDSAWSReplies: 4Last Post: 8th June 2008, 06:23 PM -
my first bandsaw box
By robyn2839 in forum WOODTURNING - GENERALReplies: 7Last Post: 7th July 2007, 01:56 PM -
Will Carbatec bandsaw blades fit Jet bandsaw?
By FlyingDuck in forum BANDSAWSReplies: 2Last Post: 13th May 2006, 06:32 PM -
meat bandsaw or bandsaw
By shakzool in forum BANDSAWSReplies: 9Last Post: 31st May 2005, 07:42 PM