Mit-a-mit hand drill question

**balt603** · 14th January 2016, 06:26 PM

Heyo,

Just acquired this Mitamit hand drill from the auction place and I'm trying to clean it up. I've dissasembled it thus far, but can't for the life of me find a way to get the gear and the post out of the body.

Has anyone come across this sort before and have any ideas?

Cheers,

Chris

**hiroller** · 14th January 2016, 07:09 PM

If you look carefully, you should find a small pin that has been peened over holding it in.
The pin and hold will be tapered, so with a fine pin punch working on the small end, you should be able to knock it out.

**balt603** · 15th January 2016, 07:20 PM

Thank you sir, I will give this a try.

Originally Posted by hiroller

If you look carefully, you should find a small pin that has been peened over holding it in.
The pin and hold will be tapered, so with a fine pin punch working on the small end, you should be able to knock it out.

Thread: Mit-a-mit hand drill question

Thread Tools

Search Thread

Mit-a-mit hand drill question

Similar Threads

A Hand Drill Post. I think it was due.

Ixion hand drill

Posting Permissions