Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Help to Identify Hand Drill
-
28th October 2019, 07:00 PM #1Novice
- Join Date
- Mar 2015
- Location
- Lake Bunga
- Posts
- 16
Help to Identify Hand Drill
Hi All, One of the older guys at our local Mens Shed brought this along last week and asked if any one knew who made this drill and about when it was made?
I thought that with all the knowledge of members,some one will know. Can anyone help?20191022_091723.jpg20191022_091640.jpg20191022_091706.jpg
-
28th October 2019 07:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st November 2019, 12:47 AM #2GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,503
Looks like a 2 speed breast drill with built in level.
Used for drilling horizontal holes in hard stuff.
These were made by a number of manufacturers.
The most likely places for ID are on the flat bar of the winding handle or a sticker/transfer on the main gear wheel.
These aren’t shown in the photos but there is an “A” cast in the main frame that may be a clue.
It’s not something I recognise.
-
1st November 2019, 12:46 PM #3Novice
- Join Date
- Mar 2015
- Location
- Lake Bunga
- Posts
- 16
Thanks hiroller for that info, on having a closer look there are no stickers or transfers on or around the main gear wheel.
After a liitle clean up I have found a made in Germany stamped in the flat bar of the winding handle as per your suggestion.
I will go online and see if I can find a manufacturer and approx date.
Thank you. Maybe some other members might have a few more clues?
-
2nd November 2019, 09:07 AM #4Try not to be late, but never be early.
- Join Date
- Apr 2011
- Location
- Bakers Hill WA
- Age
- 75
- Posts
- 1,073
Being German made I wonder if the "A" cast in the frame refers to Ahrems Goodline? McPhersons listed some of their tools in pre WW2 catalogues, I'll have a look when I go up to the shed.
Cheers,
Geoff.
-
4th November 2019, 08:56 AM #5Try not to be late, but never be early.
- Join Date
- Apr 2011
- Location
- Bakers Hill WA
- Age
- 75
- Posts
- 1,073
Nothing in the McPhersons cat's sorry.
Geoff.
-
5th November 2019, 08:01 AM #6
Hi, I might be able to help. I used my native German skills and found someone back home who wants to have a look into it.
We might need some better pictures. I will PM you with my email.
CK
Sent from my SM-G950F using Tapatalk
-
12th November 2019, 04:27 PM #7
Hi, got some feedback from my home country.
It seems very hard to nail down the manufacturer. Based on design and the A in the handle the best bet is that it's and Aurowa by Alb. Urbahn & Comp., Remscheid-Güldenwerth. That company existed from 1879 till 1966. But 100% sure we are not.
In any case enjoy the drill. I like it.
CK
Sent from my SM-G950F using Tapatalk
-
13th November 2019, 02:32 PM #8Novice
- Join Date
- Mar 2015
- Location
- Lake Bunga
- Posts
- 16
Hi CK, Thank you very much for your time and effort in tracking down a German Manufacturer that more than likely made this drill. I have since purchased the drill along with a couple of Yankee screwdrivers by North Brothers made about late 1800's - early 1900's and intend to restore them.
Thanks again.
Pete
-
22nd February 2021, 07:38 PM #9
Hi, I have news for you. We could finally identify that drill.
My contact received a catalogue recently and recognised a drill in there where you can clearly see the A in the handle.
According to that the drill was made by a company from Friedrich August Arnz.
Here is a translation using Google Translate:
Hand drills
No. 232 1/2 With two speeds that can be switched on by moving a brass button, Polito, solid construction. Black painted body and chest, red painted wheel. White parts and finely polished wooden handles. Total length approx. 240 mm. Without spikes. Packed in a cardboard box.
No. 234 Extremely fine construction, black lacquered body, green lacquered wheel and chest support. Pink. White parts finally polished or nickel-plated. With double ball holder, two speeds real wood handles and movable crank, universal 3-jaw chuck up to 122 mm. With or without level (spirit level). Total length approx. 460 mm. Without spikes. Polished or nickel-plated. Packed in cardboard box.
===========
The manufacturer is therefore company "Flott" bzw. Friedrich August Arnz in Remscheid, Germany:
Deutsche Werkzeughersteller und -handler: Friedrich August Arnz, Remscheid
The date of the catalogue is not quiye sure but assumed around 1910.
Sent from my SM-G950F using Tapatalk
Similar Threads
-
please help identify my new second hand belt linisher
By camele in forum GENERAL & SMALL MACHINERYReplies: 1Last Post: 18th November 2012, 06:28 PM -
PLS Help Identify this Old Pillar Drill
By PukMun in forum HAND TOOLS - POWEREDReplies: 1Last Post: 19th June 2010, 02:55 PM -
Identify old hand saw
By Steve123 in forum HAND TOOLS - UNPOWEREDReplies: 22Last Post: 20th May 2010, 09:35 AM -
PLS Help Identify this Old Pillar Drill
By PukMun in forum METALWORK FORUMReplies: 2Last Post: 15th May 2010, 07:31 PM