Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Ulmia OTT mitre saw
-
18th February 2020, 07:20 PM #1SENIOR MEMBER
- Join Date
- Jan 2007
- Location
- Brisbane
- Posts
- 698
Ulmia OTT mitre saw
This is part of a group of tools bought. Not in the best of condition but I'm hoping I can do something with it. I don't know if it can be dated. I'm looking for advice on cleaning and maybe repairing for use again or maybe it just has to be spare parts and I'll clean it up for good looks only. For now I have sprayed it with RP7 to try and get is moving.
IMG_8343.jpgIMG_8341.jpgIMG_8336.jpgIMG_8339.jpgIMG_8342.jpgIMG_8340.jpg
-
18th February 2020 07:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th March 2020, 06:15 PM #2SENIOR MEMBER
- Join Date
- Jan 2007
- Location
- Brisbane
- Posts
- 698
Mechanism is now cleaned and working smoothly. Saw has had most rust cleaned off and lubricated. I have just made a couple of cuts but realise I really need the instructions on how to adjust properly. Can anyone tell me if the handle is meant to be offset and why? I am assuming that the most important thing to do is have the blade tight and straight through the guides. I would appreciate any guidance from anyone with this type of saw.
Umlia clean 001.jpgUmlia clean 002.jpgUmlia clean 003.jpgUmlia clean 004.jpgUmlia clean 005.jpg
-
12th March 2020, 08:24 AM #3Member
- Join Date
- Aug 2017
- Location
- Sunshine Bay NSW
- Age
- 76
- Posts
- 80
I don't know about this make of saw but looking at the pictures it seems that the saw is in back to front, on my stanley the saw is mounted so it cuts towards the fence, you hold the timber against the fence when cutting.
Cheers. Rick
-
12th March 2020, 02:11 PM #4
Well spotted Rick.
I have one very similar but cant recall the brand as its been years since I used it. Very accurate with a good sharp blade in it. I dont recall any instruction book cane with mine. I think the handle nay just have got bent. Should not be a problem as long as the blade and spine are in line.
Regards
John
-
12th March 2020, 02:22 PM #5
I have one of these in the stash, never used it but thought the missus might when she was a TAS teacher.
I did buy a couple of new blades, not sure who from.
Might have been carbytech as I was working for them back then.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
14th March 2020, 07:40 AM #6SENIOR MEMBER
- Join Date
- Jan 2007
- Location
- Brisbane
- Posts
- 698
Thanks John, I've used it a couple of times now and like the feel of me cutting the wood. I was wondering about tolerances and alike but felt the spline was the key thing. I hope I can get to try one in very good condition and see if it is worth upgrading. This one cost $10 so I'm happy.
-
14th March 2020, 07:42 AM #7SENIOR MEMBER
- Join Date
- Jan 2007
- Location
- Brisbane
- Posts
- 698
I think I will be hunting down one in better condition and see if it is worth replacing any parts on this one.
Similar Threads
-
N.S.W. Makita LS1017L sliding compound mitre saw with Ozito mitre saw stand
By DarcysDad in forum WOODWORK - Tools & MachineryReplies: 0Last Post: 20th March 2019, 08:10 AM -
N.S.W. Ulmia
By salm@hushmail in forum WOODWORK - Tools & MachineryReplies: 0Last Post: 4th June 2017, 04:40 PM -
How do I get Sketchup to tell me the compound mitre saw angles for mitre and bevel?
By barrysumpter in forum DESIGN & DESIGNING / GOOGLE SKETCHUPReplies: 7Last Post: 7th February 2016, 09:12 PM -
Ulmia spring clamps
By Arron in forum WOODWORK - GENERALReplies: 1Last Post: 3rd November 2011, 10:43 PM -
Lock mitre or splined mitre for ply boxes (entertainment unit)
By rogerwilco in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 7Last Post: 19th August 2010, 11:21 AM