Clayton Boyer “Simplicity” build
Working with my Baltic Birch 1/4” or 12mm now.
https://uploads.tapatalk-cdn.com/201...ce23a5d429.jpg
This is essentially all the pinions and other “non-toothed” parts that are 1/4”
Left a straight line about 1/3rd down so I can cut the board before scrolling.
One of the challenges I’ve faced is the glue not perfectly sticking down edges - this might be the Kwik Grip itself or my application but this time I’ve allowed more space around the edges of the pieces and applied the glue by holding the plan piece up in front of me and spraying it horizontally in a vertical orientation.
What I also did was allow shake the piece a bit like a Polaroid before laying it down and then going over the surface, especially the lines with a folded piece of paper to squeeze the glue around underneath. Hoping this will allow me to cut more easily.