Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: needing help
-
27th November 2014, 09:42 PM #1
needing help
I am about to attempt my first of several wall clocks that I have to do but I am having trouble on a few fronts I am not sure exactly where I should put the numbers on these slices when I make the clocks? should they go on as the paper template show or should I put them right out on the outside of the burl ? I think with the second photo.
To do this sort of clock properly should I draw a circle as in the first pic and put the numbers around the circle ? Sorry f I am a little confusing but I have about 15 of these things to do and really dont want to stuff them up LOL
The other question I have is I am finishing them off with the pure glass 2 part finish and I am sure I read somewhere that I should stick the numbers on first and then poor the resin over the top and it self levels OR should I coat them before sticking on the numbers ?
I look forward to all advice I can get ?
Cheers Ian
-
27th November 2014 09:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th November 2014, 10:32 PM #2
I think the numbers located where the template shows would look better IMHO. Coating before placing numbers.
Neil____________________________________________Every day presents an opportunity to learn something new
-
27th November 2014, 10:41 PM #3
thanks big fella I was even going to ring you today to ask you about it all and had a message typed out on my phone and all LOL so thanks for the info because I think I am in over my head at the moment and not sure how to get started so that will help out heaps. Will give you a ring soon
Thanks again Ian
-
8th December 2014, 10:50 AM #4
It looks like you are using timber burls or rough cut timber.
Why use numbers, very formal. Small pegs cut from contrasting timber could be set around the face then your resin ( shudder) applied over the face.
This old face was used by Noah, but may give you an idea
Or consider stone inlays.
DSC0426230%.jpg
Have fun
PeteI tried to be normal once.
Worst 2 minutes of my life.
Similar Threads
-
New and needing a little help
By MS_Lou in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 3Last Post: 12th December 2011, 09:39 PM -
Is there a way around needing 5.5 m gunwhales?
By hereselmo1 in forum BOAT BUILDING / REPAIRINGReplies: 22Last Post: 8th December 2009, 12:26 PM -
Uni Student needing help!!
By barot1 in forum WOODWORK - GENERALReplies: 58Last Post: 2nd September 2008, 11:02 PM