Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: First time Clock build
-
14th September 2013, 10:47 PM #1Member
- Join Date
- Jan 2012
- Location
- Toowoomba QLD
- Posts
- 62
First time Clock build
Hi All,
I am fairly new to this forum and I am interested in building a grandfather clock. I live in Queensland and have searched the Clock movement importers web site, but i am confused as to what all the different types of movements refer to. I sort of know what I want in the clock, but was wondering if anyone can help with explaining the different types of movements and maybe what they look like. I will most likely purchase a plan to make the clock but will then need to get a movement to fit.
Thanks
Dez
-
14th September 2013 10:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd September 2013, 09:17 PM #2SENIOR MEMBER
- Join Date
- Jan 2012
- Location
- Littlehampton, SA
- Posts
- 302
Hi Dez Built. By the silence since your post, your question may have been too open. I can’t help much either, but if you are going to the trouble of making a grandfather clock, I would advise that you don’t bother with a quartz (battery operated) movement. When I made mine I bought a Hermle Werk 3 weight with a Westminster chime and it hasn’t missed a beat in 8 years. You can get a plain pendulum or the more fancy Lyre pendulum and you can also get a moving moon dial. Good luck.
-
2nd October 2013, 10:28 AM #3Senior Member
- Join Date
- Mar 2007
- Location
- Picton, NSW
- Posts
- 143
Sorry Dez, I have not logged in for a few weeks and so have not seen your post until now.
I think it might be best to work out what type of movement you want and then buy the plan to fit the movement. Nothing worse than putting hundreds of hours into the case and then finding that the movement you have picked won't fit the case! The movement you pick will probably be at least partially determined by the cost. The more features, the greater the cost. Generally most Grandfather movements have three weights and a pendulum about 1 metre long (114 cm or there abouts)
After that, you can choose for the weights to be hanging on cables with pulleys and you wind the weights up with a crank (key) through holes in the dial or the weights can be hanging on chains, where you wind them by pulling the chain. The better (more expensive) movements tend to have cables and pulleys.
Some movements give you only a single chime, usually "Westminster", and more expensive movements will often give you a choice of two or three chimes to choose from, usually "Westminster", "Whittington" and/or St Michael's. (The CHIME is the tune that the clock plays on the hour and parts thereof on the 1/4, 1/2. and 3/4 hours. The STRIKE is when the clock gongs out the number of gongs corresponding to the hour. eg at 6 o'clock, the clock will CHIME a tune and then STRIKE 6 gongs)
Some clocks will give you a choice of a "MOON DIAL", for extra money. The Moon Dial sits above the clock face and slowly rotates over a month, showing the phase of the moon for that particular day of the month.
Where abouts in Queensland are you? There is a clock shop called "Black Forest Hill" about 20 minutes north of Toowoomba. I have never been there myself, but their internet site indicates that it might be a good place to look to get ideas about what you might want.
There is a company called CMI (The Clock Movement Importers) who sell movements, plans and kits. Check out this. They have a list of clock plans and a list of movements and they tell you what movement goes with what case.
All the best. Let us know how you get along.
Walesey
-
26th October 2013, 11:23 AM #4Ted P Guest
You could do worse then try the site`s sponsor - Lets Make Time Clock Coy - at West Burleigh if you feel like a day at the Gold Coast. You might be pleasantly surprised.
Similar Threads
-
First time clock build - quartz pendulum Clock
By Johnnz in forum CLOCKSReplies: 5Last Post: 26th October 2013, 11:10 AM -
Hi From Lets Make Time Clock Co
By Clockgirl in forum CLOCKSReplies: 5Last Post: 26th April 2010, 09:54 AM -
'Ripple in time' or 'anyway up clock'
By TTIT in forum WOODTURNING - GENERALReplies: 20Last Post: 17th January 2009, 10:47 PM -
Analogue 12 hr Clock and Time Zones
By rodm in forum CLOCKSReplies: 8Last Post: 6th February 2008, 11:04 AM -
Time for a Clock
By junkboy999 in forum WOODWORK PICSReplies: 31Last Post: 16th October 2005, 07:44 PM