Painting/varnishing process
Hello
Re. the rudder fittings. I did glue the aluminum onto the wood with epoxy. I do hope this will hold on.
Finally the foils and spars are done:U
4 layers of two pot varnish on foils and 3 on spars.
The whole boat was primed with white two pot sanding type primer. (The interior still waits to be varnished.)
This type of primer fills any remaining scratches, small curves etc. and it is easy to sand.
In the meantime I was also working on the cart for transporting the boat arround (which already came usefull - its much warmer here now so I can take the boat outside for sanding).
Now comes the final paint.:o I have no photos yet but the first coat is already on (just tonight).