Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 6 of 6 FirstFirst 123456
Results 76 to 89 of 89
  1. #76
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    960

    Default

    NICE JOB!

    Your sail looks cut beautifully, no wrinkles, and laced to the boom? Nice, I can't do this with my Duckworks sail.

    I brought my sail to Withum Sailmaker in Amesbury MA for grommets on the reef line to tie down the extra canvass, and to add an extra reef between the boom and the first reef. It was around $100-130 or so for everything. Somewhere in there, I don't have the receipt handy. Only if you're interested.

    Now that you've named her "White Island" you're going to have to visit the Isles of Shoals.

    That's seriously an identical boat... people are going to start mixing us up.

    Where did you get your lumber? Maine Coast in York?

    Congratulations again, and nice job on the Champagne. Poseidon will be pleased!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #77
    Join Date
    May 2008
    Location
    Portland, ME USA
    Posts
    837

    Default

    Quote Originally Posted by callsign222 View Post
    NICE JOB!

    That's seriously an identical boat... people are going to start mixing us up.
    I've had it, I am painting my Goat purple. Hmmmm, I said that jokingly, but that might actually be pretty cool. Hmmmmm.

  4. #78
    Join Date
    Jul 2005
    Location
    'Delaide, Australia
    Age
    65
    Posts
    8,138

    Default

    Quote Originally Posted by wwc View Post
    On the same expedition we made our first attempt at reefing the sail which was fairly easy but with all of the excess canvas at the bottom and no way to secure it I had trouble pointing upwind.


    Flickr: wclarkson's Photostream
    We have a fix for the pointing problem thanks to some suggestions that Christophe trialled out.

    Two things when reefed. Heaps of Downhaul. Also the foot of the sail needs to be eased enough to have some depth in it.

    Christophe and some of the others can say how much seems about right.

    A third thing that can help a bit is to tie some knots in the traveller so the block is restricted from moving right over to the gunwale. Basically the boom angle to the centreline needs to be restricted to about 10 degrees.

    Gee, she looks fine on the water. That photo above shows one of the problems of photographing fast boats that move easily - they just don't look like they are moving much.

    Congratulations and best wishes
    Michael

  5. #79
    Join Date
    Jul 2005
    Location
    'Delaide, Australia
    Age
    65
    Posts
    8,138

    Default

    Quote Originally Posted by Compass Project View Post
    I've had it, I am painting my Goat purple. Hmmmm, I said that jokingly, but that might actually be pretty cool. Hmmmmm.
    John's Green boat did look good too. Also remember back to Jamie's Blue one and Juan Carlos' charcoal coloured Goat.

    MIK

  6. #80
    Join Date
    Jul 2009
    Location
    Portsmouth, NH
    Posts
    17

    Default

    Quote Originally Posted by Compass Project View Post
    Congrats! Looks like Squam!?
    It's actually Lake Umbagog, near Errol, NH.

  7. #81
    Join Date
    Jul 2009
    Location
    Portsmouth, NH
    Posts
    17

    Default

    Quote Originally Posted by callsign222 View Post
    Where did you get your lumber? Maine Coast in York?
    Most of it was from Goosebay Lumber in Chichester, NH, but we got a few things (mast timbers if I remember correctly) from Selectwood in Portsmouth.

  8. #82
    Join Date
    Apr 2009
    Location
    Hunter Valley NSW
    Age
    69
    Posts
    1,759

    Default

    Quote Originally Posted by Boatmik View Post
    John's Green boat did look good too. Also remember back to Jamie's Blue one and Juan Carlos' charcoal coloured Goat.

    MIK
    And not forgetting about the black Jack of Mudjimba from Queensland, which I think looks awesome too!

    Attachment 147694 Attachment 147695

  9. #83
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    960

    Default

    Goosebay is awesome, I actually got all my mast and foil materials from them. They've seen my boat a couple of times.

    I'm going to Lake Umbagog on Saturday, staying up near Sunday Cove, Camp 15. Any advice on how not to hit submerged rocks? How was the sailing? I've never been, heard it was shallow.

    Wow, two GIS in as many weeks on a relatively obscure NH lake. Kind of cool!

  10. #84
    Join Date
    Jul 2009
    Location
    Portsmouth, NH
    Posts
    17

    Default

    The sailing on Lake Umbagog is great—there is enough open space for pretty good wind out towards the middle, but where we were on the western shore (R27) the wind was very unpredictable and shifted a lot within a few hundred yards or so of the shore. Several times the wind on shore was completely opposite the prevailing wind on the lake. Although the lake is fairly shallow (10-15 ft I think) you really only need to worry about rocks right around the shore, especially eastern shore of the lake south of Pine Point (below R15), which is very rocky. If you sail across the lake to the marshy area where the Magalloway River comes in it gets fairly shallow but there are a few channel markers to look out for. We thought about rigging up some sort of anchor/mooring setup to keep the boat off the rocks but we ended up just carrying it up most of the way out of the water when we weren't sailing it, and the bottom didn't get too scratched up.

    It's quite a coincidences to get two goats on Umbagog less than a month apart, have a great time and make sure you take lots of pictures!

  11. #85
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    960

    Default

    Thank you for the comprehensive advice, I'll take pics and put them up next Monday!

    I'll have my haul-out line, so I'll keep her moored offshore. Without a tide to grabble with, it'll be child's play in comparison.

  12. #86
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    960

    Default

    Quote Originally Posted by wwc View Post
    The sailing on Lake Umbagog is great—there is enough open space for pretty good wind out towards the middle, but where we were on the western shore (R27) the wind was very unpredictable and shifted a lot within a few hundred yards or so of the shore. Several times the wind on shore was completely opposite the prevailing wind on the lake.
    This is typical on waterbodies with large obstructions on their shores, especially on the prevailing side (western side for N. hemisphere), and affects almost every nice waterbody in NH due to our scenic yet manipulative hills.

    Newfound Lake is a great place to sail, but the ramp in the west side with a hill behind it and lots of tall trees right to the water... sometimes it can be tricky/frustrating maneuvering close to shore with other non-sailing traffic as the wind swings around 180 deg. Sunapee-- Getting up the gut in the middle with the islands up to the upper lake can be a real hassle in a good NWesterly blow...

  13. #87
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    960

    Default

    Weekend trip to Umbagog got cancelled, my wife got sick, boooooooooo sick.

    So I did some local sailing instead.

  14. #88
    Join Date
    May 2008
    Location
    Portland, ME USA
    Posts
    837

    Default

    Quote Originally Posted by callsign222 View Post
    So I did some local sailing instead.
    ...I bet she was really pleased with you

    (You met my friends Chris and Carrie on Bangs...wow. Did I tell you the story of other friends that I met on Jewell?

  15. #89
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    960

    Default

    Bro, I just sent you an email on said encounter.

Page 6 of 6 FirstFirst 123456

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •