Thread: GIS skiff in Barbados

Hello Paul,

The plan page for the tiller and rudder stock will tell you the dimensions of the cut out in the transom and its location.

For bulkheads 2 and 3 I kept 80 mm distance from all edges of the bulkheads to the cutouts.

Best regards,

Joost

Welcome woodguy7777!

Are you building a GIS? Do you have pictures? Post them up, we're always happy to ooooh and aaaah over another boat.

thanks joost for the information i have purchased plans by downoad on wed.
will start building on monday.
I own a cnc machine and will be using it to cut parts.
was hoping to get the cnc files from Michael, but have not had any luck so far on that. that would have been a big help.
anyhow will spend sat making my own files.
is anyone on here used a cnc to cut a GIS.
i live in Barbados caribbean
have built a few sailing boats two Wharram cats and a jim brown Trimaran.
both cats was stitch and glue.
once again thanks for the help paul

I resent the files tonight.

Hope they work this time.

Michael