Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
6th February 2009, 07:09 AM #1New Member
- Join Date
- Jan 2009
- Location
- Northern California
- Posts
- 5
Lumber quantities and a cutlist for the GIS
I'm in the process of ordering the lumber for the GIS. Specifically the WRC at this point.
I'm curious if anyone has created a cutlist or even just broken the timber list given in the plans into the number of pieces needed and at what dimension.
For example the Imperial Timber list calls for 51 feet of 3/4" x 1 3/4" framing material, this is the cumulative length of 2 to 3' pieces required to frame the bulkheads etc. But it doesn't list how many at what specific length.
I'm trying to go through the plans and count the number of framing members at what length and dimension, the goal being to create a cutlist that I can use to order the lumber and precut the pieces.
My part of the world seems to be a weird blackhole for lumber. Although the north pacific coast where WRC is prolific is a mere 5 hours away, I can't seem to find decent sources for it...Additionally, I find I'm paying extra for the long lengths required in some spots. Therefore, a cutlist would be invaluable where the optimal use and accurate ordering of lumber is concerned.
So I guess my question (after a long winded explanation) is; Does anyone have a cutlist or material order list they've used before? If so I'd love to see it...metric or imperial.
Michael...Do you have any use for a sketchup version of your GIS shop drawings?
-
6th February 2009 07:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th February 2009, 11:07 AM #2SENIOR MEMBER
- Join Date
- Sep 2007
- Location
- Savannah GA USA
- Posts
- 583
My time is too valuable to work up the sort of list you are looking for. I had no good source for absolutely clear grades so I settled for the best construction grade material I could find by picking through the stacks. I probably purchased 25% more wood than ended up in the boat but it gets used along the way for bracing and other odds and ends. Anything left over was set aside for the next project.
If you have a source that will let you order perfect material cut to exact widths and lengths so all you have left is sawdust they are going to charge an arm and a leg. Buy standard material--the best you can find--and get a little extra.
-
6th February 2009, 04:31 PM #3New Member
- Join Date
- Jan 2009
- Location
- Northern California
- Posts
- 5
Yeah, I wasn't asking you to create one for me. I figured someone may have had one laying around or remember their order. And I wouldn't dream of having the material precut for me. I simply want to approach this in an efficient manner.
I'll probably have an 8 hour round trip drive to gather all the materials and I just want to do it once. Extra material is fine (to a point), but not enough would be a kick in the neck. I'm actually mostly done compiling things and I'm considering putting it into sketch up.
...maybe I have too much time on my hands...but I kinda like doing it this way...
-
9th February 2009, 12:48 AM #4SENIOR MEMBER
- Join Date
- Sep 2007
- Location
- Savannah GA USA
- Posts
- 583
Sorry, Stumpy, I could have been a little clearer. I didn't think you were asking anyone to create a list for you, I was just explaining why I don't have such a list to share. It would take too long and I would have to expend precious brain cells to create such a list.
I believe MIK's materials list is all one needs to purchase the correct materials in the correct quantities. You just have to assume some waste as you cut to clear knots and other defects. When you're selecting lumber from the racks you end up guesstimating how best to use the board in your hand. You may guess wrong so to avoid a second trip you buy a little extra.
-
9th February 2009, 02:38 PM #5
Howdy,
In the existing timber list the number of pieces column tells you what I think you want to know.
When it gives a number 1, 2 etc it is telling you how many pieces if you can get the lengths OK. It can be joined with scarf joins of course if you cannot get the lengths.
When the measurement can be made up of shorter unspecified lengths I show "/" in the number of pieces.
Hope this helps
Michael
Similar Threads
-
Anyone know where to buy small quantities of western red cedar?
By teeg58 in forum TIMBERReplies: 1Last Post: 8th August 2008, 09:13 PM -
Edgebanding in small quantities
By Aeroman in forum WOODWORK - GENERALReplies: 3Last Post: 4th March 2008, 10:41 PM -
CutList Plus software
By andrewsd in forum WOODWORK - GENERALReplies: 5Last Post: 26th March 2007, 12:06 AM