Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 91 to 105 of 139
-
30th May 2012, 07:17 AM #91
-
30th May 2012 07:17 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th May 2012, 09:38 AM #92Dave
StorerBoat Builder, Sailor, Enthusiast
Dave's GIS Chronicles | Dave's Lugs'l Chronicles | Dave's StorerBoat Forum Thread
-
4th June 2012, 10:30 AM #93Prototypes-R-Us
- Join Date
- May 2009
- Location
- Rosedale B.C. Canada
- Posts
- 147
Andrew Linn launched the OozeGooze today, here is the write up and pictures.
Launching the OozeGooze
Rick Landreville
Rosedale, B.C. Canada
-
4th June 2012, 03:45 PM #94Perttu
- Join Date
- Jul 2010
- Location
- Finland
- Posts
- 73
-
7th June 2012, 01:12 PM #95Prototypes-R-Us
- Join Date
- May 2009
- Location
- Rosedale B.C. Canada
- Posts
- 147
Ok, I think today is moving day for the OozeGooze. It leaves Salem Oregon either today or tomorrow for Texas. It will compete in the Texas 200, then Mike and Jackie Monies are taking it from Texas to Oklahoma. There, Shawn Payment is taking it from Oklahoma to South Carolina, then racing it in the OBX130. From there, it goes back to Oklahoma for the SailOklahoma Boat Festival where Michael Storer will be using it. From there, Mike and Jackie are going to deliver it all the way back across the country where I will pick it up in Port Townsend Washington, then trailer it back to British Columbia.
I hope it gets back home before the water gets hard.
Rick.
-
20th June 2012, 05:54 PM #96Perttu
- Join Date
- Jul 2010
- Location
- Finland
- Posts
- 73
Photos from Texas200 :
-
23rd June 2012, 02:42 PM #97
My Favourite was this one ...
-
23rd June 2012, 10:01 PM #98
What happened with the mizzen sail? Is this a way to reef it?
-
25th June 2012, 04:41 AM #99Senior Member
- Join Date
- Dec 2009
- Location
- Texas
- Posts
- 319
Andy said that the mizzen was too large and was rounding the boat up too often. He said the mizzen was about 27sqft, my Hapscut (19.5ft long) has a mizzen of 23sqft while my GIS is at 15sqft.
His "reef" was very clever and the boat sailed well the entire event.
-
25th June 2012, 09:33 PM #100
It was one of my worries about the boat for extended strong wind events. No doubt at all that this is a difficult event and one where there is more learning than a few years of sailing in more regular conditions.
The general principle is there ... that when heading downwind it is nice to have sail area at the front of the boat. But going upwind or reaching you need a reasonable balance.
The area is bigger because the centreboard is much further back than the Goat and the mast much further forward.
I'm suspecting there might not have been enough rudder in the water because of the higher transom ... but I want to try some things with Andy and other sailors first.
One thing that is shown is the capability of the hull for this type of sailing - lots of wind from the stern. Andy was very happy with the speed.
We are talking in the background about simple improvements. One of the most obvious might be a balance lug mizzen so it is reefable too.
Michael
-
26th June 2012, 03:57 AM #101
John, did you participate with your Haps Cut? I can't seem to find much info on this year's event. What am I missing? [Edit: Never mind, I found the Facebook page...]
I hope we'll get more of a review on the OozeGooze, although it's clear that the boat has a very busy schedule.Dave
StorerBoat Builder, Sailor, Enthusiast
Dave's GIS Chronicles | Dave's Lugs'l Chronicles | Dave's StorerBoat Forum Thread
-
26th June 2012, 04:15 AM #102Senior Member
- Join Date
- Dec 2009
- Location
- Texas
- Posts
- 319
I think it's a information problem between the easily posted items on Facebook verses managing a website. Some people don't do Facebook and others have gotten busy and don't have time to post.
Here are the 2 sites:
Log In | Facebook
The Texas 200
We had a blast on Hapscut.
-
26th June 2012, 05:01 PM #103Prototypes-R-Us
- Join Date
- May 2009
- Location
- Rosedale B.C. Canada
- Posts
- 147
Here are a few pictures of it I had sent to me.
Rick.
-
27th June 2012, 12:03 AM #104
-
27th June 2012, 03:17 AM #105Member
- Join Date
- Oct 2011
- Location
- Victoria, BC, Canada
- Posts
- 76
Wow, that sure looks like a lot of boat for the size. Looks like a whole lot of fun, and what a great paint scheme Definitely some national pride there.
Similar Threads
-
Ocean Explorer - Nano Cruising boat from Perttu and Boatmik
By Boatmik in forum Michael Storer Wooden Boat PlansReplies: 87Last Post: 15th August 2012, 03:55 PM -
Ocean and a seahorse
By Simomatra in forum WOODTURNING - PEN TURNINGReplies: 12Last Post: 6th February 2011, 10:24 AM -
Ocean Explorer in Google Sketchup 3D
By scottychop in forum Michael Storer Wooden Boat PlansReplies: 31Last Post: 16th December 2010, 09:59 AM -
Wood Explorer CD Version 2.0 released
By RichardMiller in forum ANNOUNCEMENTSReplies: 1Last Post: 22nd October 2007, 11:18 PM -
Interner Explorer Version 7
By Phil Spencer in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 5Last Post: 28th October 2006, 08:39 PM