With Goat 3D I have flipped her over and trimmed back the chine logs ready to fit the hull bottom. Having put the bottom temporarily in place I headed under the boat and the bulkheads are all looking straight and true compared to the centre line drawn. I plan to epoxy coat the bottom before it is fitted and have marked where the bulkheads will sit so that they can be left bare.
I also trimmed down and fitted a piece of oak to the bow, it needs final shaping but will be more impact resistant when I do hit something.
Suddenly It is starting to look like a proper boat now!
I’ll try and sort some pics but can’t find my camera at the moment.