Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
21st February 2014, 12:43 PM #1Senior Member
- Join Date
- Sep 2012
- Location
- ont Canada
- Posts
- 399
30 foot ceiling design converted to a 3D file format
found a ceiling design 30 foot diameter very detailed converted it from some difficult cad format to a *.stl file and sized it to a smalled size
and cut it out .
Did loose a lot of the detail but still is quite interesting
http://youtu.be/t7T7rTPRoQE
used 2 1/4 end mills one roughing flat 17 % stepover 80in/min feed 16K speed ,the round bottom one 8% stepover 16K 100 in/min took 47 min total
not counting the steptime of 13 min
-
21st February 2014 12:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
a 3D file converted to 2D and cut out
By woodman12 in forum CNC MachinesReplies: 2Last Post: 19th October 2013, 01:19 AM -
Nautilus speakers design , with file download
By SawDustSniffer in forum HI FI EQUIPMENTReplies: 19Last Post: 18th February 2012, 04:14 PM -
Replacing ceiling battens to save moulded plasterboard ceiling
By Rob L-C in forum WOODWORK - GENERALReplies: 3Last Post: 25th January 2011, 12:44 PM -
foot design and reverse chucking
By robatman in forum WOODTURNING - GENERALReplies: 16Last Post: 31st March 2007, 10:50 PM -
Just converted
By craigb in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 14Last Post: 4th September 2004, 09:33 PM