Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: 4 axis plugin for Mach3
-
12th July 2012, 04:12 AM #1New Member
- Join Date
- Jul 2012
- Location
- Canada
- Age
- 86
- Posts
- 7
4 axis plugin for Mach3
Would someone have a Jamen 4 axis JNC-40 plugin (compatible with Mach3), and perhaps share it wit me.
I purchased a Jcut 6090B router from China a couple of months ago. It was built as a 3 axis + rotary. I wanted a 4 axis machine, and since than I bought another driver, wired it in, but I can't get the rotary to work. It works if I swap the X axis for it. The manufacturers say, I need a different PLCX card for it. But on the card I have in the machine now, there is A axis terminals. I and Hood from CNCzone think it is the plugin that need to be different, because it supports only 3 axis, not 4.
Does anybody out there have/had similar problems?
I would really appreciate some input.
Mike
-
12th July 2012 04:12 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th July 2012, 10:05 AM #2
If you have a break out board on the unit, it's just a matter on connecting to the step and direction pins of the serial port. Of course match the Mach 3 configuration pin setup.
This would bypass the need for any drivers or use of their hardware. Unless the plcx card fits into a chassis provided by the manufacturer?
-
12th July 2012, 11:05 AM #3New Member
- Join Date
- Jul 2012
- Location
- Canada
- Age
- 86
- Posts
- 7
Thanks Friend,
No, there is no breakout board at all, just this PLCX card.
Similar Threads
-
Use a plugin to draw a magazine
By brandy20 in forum DESIGN & DESIGNING / GOOGLE SKETCHUPReplies: 0Last Post: 30th November 2011, 02:24 AM -
Cutlist plugin, all you need to know for a good start with it
By brandy20 in forum DESIGN & DESIGNING / GOOGLE SKETCHUPReplies: 0Last Post: 20th October 2011, 07:10 AM -
Idiots Guide to Z axis setup in mach3
By pkowal in forum CNC MachinesReplies: 6Last Post: 19th September 2011, 07:51 PM -
Please upgrade forum runner plugin
By pellcorp in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 0Last Post: 28th July 2011, 07:38 AM -
Perpendicular Faces plugin
By brandy20 in forum DESIGN & DESIGNING / GOOGLE SKETCHUPReplies: 0Last Post: 29th March 2011, 12:35 AM