Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Ballscrew end supports
-
28th December 2011, 08:10 PM #1
Ballscrew end supports
Any one got a decent set of specs for the ballscrew end supports from Linearmotionbearings? I cannot read the ones he has on his ebay shop. I have emailed them, but it could take a while to get a response.
thanksChris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
28th December 2011 08:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th December 2011, 08:20 PM #2GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 3,784
I had the same problem but if you have a look at a couple of different listings you will find a better copy.
This one will get you what you wantCheers,
Rod
-
28th December 2011, 09:08 PM #3
Thanks Rod, eyes are starting to get a bit old on me.
Once I get the spec sheets together, for the drawing I'm doing, I'll see if I can get them added to the library. Might save a bit of angst for future cnc builders.Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
28th December 2011, 10:16 PM #4GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 3,784
Know what you mean about eyes getting old.
I keep a file (paper version) of all the specs and manuals which I refer to often.
Mach3 uses ascii codes for hotkeys and I can never remember the values for control, shift and alt so my reference sheet comes in handy.Cheers,
Rod
Similar Threads
-
Ballscrew Run-out
By electrosteam in forum METALWORK FORUMReplies: 11Last Post: 17th January 2011, 07:38 PM -
Square Rails and Ballscrew machining.
By Ch4iS in forum CNC MachinesReplies: 8Last Post: 18th November 2009, 08:52 PM -
Truss supports??
By Sponelle in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 2Last Post: 1st July 2009, 12:48 PM -
Setting up rear ballscrew support.
By simso in forum CNC MachinesReplies: 1Last Post: 27th December 2008, 09:51 PM