Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Can this be used for a CNC
-
1st January 2009, 12:00 AM #1
Can this be used for a CNC
As I know absolutely nothing about CNC machines I thought I would ask here, could the mechanism from a Skill tester (you know the claw thing from the arcades with the stuffed toys) be used as a basis of a CNC machine ???
Regards
Warrick
-
1st January 2009 12:00 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st January 2009, 12:23 AM #2New Member
- Join Date
- Jan 2009
- Location
- Quito
- Posts
- 6
warrick,
can you tell a bit more about the dimensions? From looking at the picture the frame looks a bit bend and a little thin around the edges.
If you want to get into CNC there are some wooden frame CNC designs out there that are fairly easy to make.
Ries
-
1st January 2009, 11:27 AM #3
Warwick
The easiest answer is YES it could be used fro a basic CNC machine but I would think the accuracy would not be the best looking at the slack in the chains.
With some design changes and components from this I beleive you could make a CNC machine that would be quite good.
Mick