Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: CNC kit for HM52 mill?
-
11th April 2012, 02:28 AM #1
CNC kit for HM52 mill?
Does anyone know if there is a "ready to install" CNC kit commercially available for the HM52 milling machines?
I was asked this by a friend who has a specialist plastics manufacturing business. He uses a CNC router extensively but want to convert his milling machine for larger parts. He is not an enthusiast machine builder like some of us, he just wants to get work done... understandably.
Any suggestions or sources?
Cheers,
Joe
-
11th April 2012 02:28 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th April 2012, 10:03 AM #2
Hire Rodm to convert it for him.
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
12th April 2012, 01:36 AM #3
Hi Joe,
Since I'm part way through just such a conversion, I can offer the following advice.
First, I'd replace all the lead screws with ball screws, not something I'd imagine you would get in a kit, but you never know.
Second, there's the difficulty in converting the Z axis, and whether to drive the quill or the knee, neither is entirely satisfactory, but I'm hoping that with a fair bit of modification to the HM52 I can make the quill option work.
Conclusion, is don't do it... look for a mill that already has ball screws, for example like the King Rich, some of their models offer ballscrews as an option. Some also already have provision for mounting servos etc..
Check out this thread on CNC zone for a KRV-2000 conversion Build Thread King Rich KRV-2000 Knee Mill CNC Conversion - CNCzone.com-The Largest Machinist Community on the net!
Regards
Ray
Similar Threads
-
HM52 CNC Conversion
By RayG in forum METALWORK FORUMReplies: 182Last Post: 16th November 2010, 09:03 PM -
HM52 lathe
By Stustoys in forum METALWORK FORUMReplies: 6Last Post: 21st August 2010, 01:39 AM -
HM52 collet sets
By eskimo in forum METALWORK FORUMReplies: 36Last Post: 11th June 2010, 10:39 AM -
S/h hm52
By Dave J in forum METALWORK FORUMReplies: 0Last Post: 23rd April 2010, 06:35 PM -
Hafco Hm52 on the fritz again
By Retromilling in forum METALWORK FORUMReplies: 25Last Post: 12th August 2009, 11:14 AM